Search the forum,

Alpha intec

Discuss Alpha intec in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
hammers4spanner

hammers4spanner

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
7,712
Got one of these in my own home and for some odd reason a couple times through the night it will make a sudden buzz noise promptly followed by a few dull thuds .

Phoned alpha and they had no idea !!!

Anyone??
 
Lol, what are you doing with one in you're own home??????, divertor motor's buzz and open occansionly!
 
Got a deal deal on it lol

Ahh could well be the diverter then .


Phoned up tech help and it sounded like i phoned john from the pub lol
 
Tech help line = hah! Does it fire up occasionally to?
 
hammers4spanner said:
Got one of these in my own home and for some odd reason a couple times through the night it will make a sudden buzz noise promptly followed by a few dull thuds .

Phoned alpha and they had no idea !!!

Anyone??
Click to expand...

Buzzing noise in the night ? are you sure it's the boiler ? dull thud ! sex toy dropped on floor :rolleyes2:
 
Status
Not open for further replies.

Reply to Alpha intec in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

F
Mystery Mira Elite QT Leak
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
225
Firefox
F
jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
277
oz-plumber
O
dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
176
dreikher
dreikher
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
78
Lou
Lou
N
Towel Rail Valve Advice please (35 Characters needed.)
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
166
Timmy D
T
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock