Search the forum,

A warm hello from Norfolk broads!

Discuss A warm hello from Norfolk broads! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
J

jimlucas78

Messages
5
Hello UKPF,

I'm James the Gas Safe engineer from Norfolk.... where there's not much gas!! Haha.
When I do eventually find some gas yet alone some work I look forward to utilising the wealth of information here contributed by you guys.

Many thanks

James
 
Welcome to the forum James, had a nice holiday in the broads this year and the weather was good lol.
Slowly build your post count up by chipping in on different threads then apply for access to the gsr only section.

Send an email with an image of your current gsr card to [email protected], remembering, of course, to tell us who you are on the forum!
 
Last edited:
hello james,
thought about moving out to the broads with a little boat sign written with me tools in doing lpg stuff!
Spain has taken my interest so it might not happen......
 
Hello and welcome
 
Status
Not open for further replies.

Reply to A warm hello from Norfolk broads! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
0
Views
53
Splitty
S
B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
212
oz-plumber
O
F
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
4
Views
365
Timmy D
T
Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
127
Stigster
Stigster
D
Extending outdoor tap and drain
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
208
DIwhYdidIstartThis
D
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock