Search the forum,

Discuss 6022-6032 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
S

snorkel1234

Hi
Need advise I have just completed a 4 week course in the City and Guilds 6022-6032 and BPec would like to do the 6189 would I get any time or credit for the above course.
I understand that I will not get any discount, just feel that part of the 6189 does have the 6022-6032 content in it. Further is the C@G 6189 recognised in New Zealand.
Ta
Rory
 
whats in the 6022-6032?

do you mean you want to do the 6089 NVQ? seems like a big jump froma 4 week course
 
no I would like to do the 6189 City and Guilds, it is a 8 week course, the 6022-6032 BPec does cover a part of the 6189, just feel that some form of credit in the duration of the course should be gived even if it is 2 weeks!
 
Sorry meant to say, 6129 Tech Cert, just feel that a large number of topics covered by the 6022-6032 are the same.
 
Status
Not open for further replies.

Reply to 6022-6032 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
301
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
229
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
223
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
226
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
217
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock