Search the forum,

18mm soft copper liners

Discuss 18mm soft copper liners in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
G

Garry Lupton

Does anyone know where I could get hold of a dozen 18mm soft copper liners ( Conex/Isoconex Item No F103031000SWC).IBP supply only packs of 100 which cost nearly £200.
Any help appreciated
 
Garry Lupton said:
Does anyone know where I could get hold of a dozen 18mm soft copper liners ( Conex/Isoconex Item No F103031000SWC).IBP supply only packs of 100 which cost nearly £200.
Any help appreciated
Click to expand...


Order through your local plumbers merchant and if you have an account you will get a discount but you will still need to order 100


Eco

What is it for? underfloor heating?
 
Last edited by a moderator:
Status
Not open for further replies.

Reply to 18mm soft copper liners in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

A
copper vs pushfit pipes
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
227
Chuck
C
W
Outdoor Tap at Porch
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
218
Dave Moore
D
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
301
Chuck
C
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
175
SimonG
SimonG
F
Mystery Mira Elite QT Leak
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
224
Firefox
F
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock