Search the forum,

snapped

Snapped is an American true crime television series produced by Jupiter Entertainment. The series depicts high profile or bizarre cases of women accused of murder. Each episode outlines the motivation for murder, whether it be revenge against a cheating husband or lover, a large insurance payoff, or the ending to years of abuse, with each murder's circumstances as unique as the women profiled.Snapped premiered on August 6, 2004 on Oxygen. It has since become the network's longest-running original series, with its 28 defined seasons and sixteen years in production (and two spin-offs) outlasting the seventeen seasons and thirteen years of the Bad Girls Club. The show also played a large role in the decision by parent company NBCUniversal to relaunch Oxygen as a crime network in 2017. As of November 22, 2020, 500 original episodes of Snapped have aired.

View More On Wikipedia.org
  1. C

    Refilling key snapped in open position on Worcester MT10-safe to use?

    Hi all, I wonder if someone can help. We have a Worcester MT10 combi boiler that has a fault with the expansion vessel. The landlord is having the boiler replaced this weekend, but in the meantime I was advised by their plumber to top up the pressure each morning (as it's currently dropping...
  2. C

    Bath drain problems plastic snapped

    Hi All, Have accidentally snapped something plastic that the bath drain screws into. Can anyone tell me from the attached images what the y shaped plastic is called and if I can replace it? Or if anything else can be used instead as a replacement? Thanks, Craig
  3. A

    Remove an ‘Edwardian’ shower diverter valve

    Hi all, Hoping you can help? The spindle has snapped on our diverter valve so presumably it needs to be changed. I’m struggling to get the old one out though...is it just brute force turning it anti-clockwise? Driving me crazy? Thanks
  4. B

    Plastic pipe thread snapped off inside compression fitting - how to remove?

    Hi The fitting is brass (though doesn't look it in photo), the stuck plastic threaded pipe section is off the bottom of a standard ballcock assembly (bottom inlet) . It's snapped very cleanly, dead level with the nut. So, any smart ideas on how to get it out? Thanks
  5. T

    First time I’ve seen this.

    Both flue and air held together with cooking grease. Spent the first hour cleaning!
  6. T

    Snapped off shower head in wall

    Does anyone know how i solve this problem. I broke my shower head the other night while cleaning it. The metal has sheared off at the elbow joint in the wall which connects to the copper water feed from the valve. So i have the elbow joint still in place and secure, but it has the threaded bit...
  7. C

    Boiler condensate hose to pipe connector has snapped. What's the best replacement?

    Hi all, The connector between the 15mm flexible condensate hose and pipe from my boiler has snapped. I'm struggling to find a replacement connector. I'd appreciate it if someone could point me in the right direction please. Also, what's the best way of removing the old connector? Thanks in...
  8. AlexGas

    Rad tail snapped...

    Rad tail snapped on me today. DOH! The wall looks well thin to me, thanks Pegler... not! Took me a good 10 min to fish the rest out of the rad.
  9. U

    Kitchen waste pipe snapped

    Hi, I'm after some advice re kitchen waste pipe. I was removing the current floor and the waste snapped where it's welded to the pipe that goes into the ground. The 40mm pipe snapped at the volar of the 55mm (ish) pipe so there is nothing to attach to. Is there any way to get around...
  10. G

    gate valve snapped internally

    Hi all Trying to change 15mm gate valve (used as bypass valve) . And I cut it off the pipes of both side and found out it is snapped internally, But the gate/wedge is gone missing, the valve was in vertical position just next to the pump, as Diameter of the gate/wedge I think must be little...
  11. D

    Look how this pipe has been snapped..

    Went to do some work on this pipe & it just came away in my hand.. I thought it was a bit strange how clean of a snap it was.
  12. E

    Worcester Bosch Pressure releif valve snapped off

    I appear to have snapped this off, though it turned like a tap, but as it snapped off in my hand and i looked at it I realised it's not supposed to turn like a tap. How big a job is it to put a new one in? can it be done without taking the boiler off the wall? this is the part here i...
  13. B

    I've snapped external stopcock

    Hi guys, water board had tarmac'ed over external stopcock so couldn't replace internal leKing stopcock they came out after 3 weeks and put the access grid back in. I opened it up only to find it full of concrete!!! Phoned them back out, the came today and used a crowbar to break up the...
  14. E

    He snapped his nob!

    Not as exciting as title may have u believe! Custard diagnosed with help from internet ( not ukpf) that his ecotec pro mkI needed a new diverter as ch wasn't working. He got diverter. I Fitted it , boiler wasn't working still. Shorts out stat / programmer??? Nothing. S97... Take cover off pcb to...
  15. P

    Key snapped off in Worcester Greenstar 30si boiler

    Hi, I have a Worcester Greenstar 30si, I noticed earlier in the week that that the pressure was right at the bottom of the green bar when everything was off, but went up and stayed in the normal area when the heating was on. The heating and hot water is working fine. (I have to top it up a...
  16. L

    Boiler Key snapped Worcester 281 Junior combi

    I have a Worcester 281 Junior combi and the white key that I turn for topping up the pressure has snapped and I think it might be in the open position. If I turn the boiler on to heat the radiators will I be causing any damage to the boiler as I am unable to remove the inserted half of the key.
  17. W

    Any tips on getting half a snapped van key out of ignition?

    I've checked and it's not magnetic. Van still starts by insets remaining half in. It's the type with a chip in it too. For all I know it'd work forever like this but I'm down to one half of a key (spare lost) and so wouldn't mind retrieving it and getting a spare cut.
  18. N

    Snapped tap top off in on position cant now switch off any ideas?

    Hi, I had a go at replacing a tap washer tonight it should have been the easiest thing in the world but as you have probably guessed from my username it didnt go so well. I could not see any cap at the top where a screw might be hiding so I thought it might be one that you have to unscrew / turn...
  19. B

    bleed screw snapped

    as above? any tips on getting the bloomin thing out as its built onto the rad? radiator cost £500 so cant imagine the customer will want to replace it. They did it not me :) I have thought about either drilling it out with a small metal bit but this could damage the thread of the rad or...
  20. J

    Snapped stop tap owes

    Hope someone can help. I recently changed some taps and closed the stop taps under the sink. On completion I have turned the tap back on and it would apprear that one has sheared in the closed position. I know this because the handle is turning and my diswhaser is not receiving any water...
Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock