Search the forum,

he30

The HeS 30 (HeS - Heinkel Strahltriebwerke) was an early jet engine, originally designed by Adolf Müller at Junkers, but eventually built and tested at Heinkel. It was possibly the best of the "Class I" engines, a class that included the more famous BMW 003 and Junkers Jumo 004. As it started somewhat later than these two designs, and was thus expected to enter service later, the Reichluftfahrtministerium (RLM) ordered Heinkel to stop work on the design and put their efforts into more advanced designs.
The HeS 30 was designed before the RLM introduced standardized naming for their engine projects. It was assigned the official name 109-006, and it was sometimes called the HeS 006 as a short form. Development ended just as these names were being introduced, so "HeS 30" naming is much more common.

View More On Wikipedia.org
Recent contents Top users
  1. Martdj

    ideal Isar He30 boiler works but the contol panel appears to be dead

    I have an ideal Isar He30 ( yes I know they are crap!) the boiler works but the contol panel asppears to be dead, the DHW and CH temperature controls have no effect and the boiler runs at max temp on both DHW and CH. I have repalced the display/contol panel and it still appearsto be dead. Would...
  2. S

    IDEAL icos he30 boiler Opentherm

    Hi all, I have an IDEAL icos he30 boiler. I understand that this is not Opentherm capable, as it is quite old. But I was wondering if there is a way to do this, as I would like to use a Tado or Nest thermostat on it? Any advice would be appreciated. Thanks
  3. U

    Ideal Icos HE30 boiler start-up sequence

    My Ideal Icos HE30 boiler has been reliable starter since its installation 12 year's ago. It has been serviced every year since by the original installer. Today the boiler failed to fire though the thermostat is calling for heat. I replaced the batteries in the thermostat. I turned the...
    • Ulsinus
    • Thread
    • america boiler he30 icos ideal usa
    • Replies: 3
    • Forum: USA
  4. U

    Icos He30 combi boiler resolution L9/H9 fault codes

    My boiler is an Ideal Icos HE30 boiler. This supplies the central heating and a separate heat store - in other words a big cylinder - for domestic hot water. It is not a combi boiler. The boiler is 10 years old and it has been serviced by the original installer each year since installation. It...
    • Ulsinus
    • Thread
    • america boiler codes combi combi boiler fault he30 icos l9/h9 usa
    • Replies: 12
    • Forum: USA
  5. C

    Ideal Isar HE30 no heating

    Morning all, just want to get an idea of the problem before I call engineer. Have been ripped off in the past, so.... Hot water absolutely fine. First time I’ve turned CH on this year, it makes all the right noises as though on, display shows ‘c’, pressure fine, but the rads still stone cold...
  6. F

    Ideal Isar HE30 Condensate Trap

    Hi all, Got home today and the dreaded Ideal Isar boiler had stopped working on me. Error L:F flashing on the control panel Took the front off and noticed a small trickle of water dripping around a small copper pipe on the left hand side According to a few things that I've seen online the...
    • Flook75
    • Thread
    • america condensate he30 ideal isar trap usa
    • Replies: 2
    • Forum: USA
  7. B

    Sime Murelle HE300 not getting to temperature

    Hi, have a Sime Murelle HE30 boiler on traditional CH 15 rads plus hot water tank circuit. Boiler gets to about 60 then modulates, drops to 50 ish but fails to reach demand temp of 75. Pressure is ok (although could do with a bigger expansion vessel). It was fine last week! Any ideas?
  8. J

    Ideal Icos He30 LE code, Emc filter?

    Hi guys Been to regular of mine, original call was pointing towards low pressure and LE Code, he topped it up and got the boiler working for a day or so but now it is absolutely dead. I've been round and tested it and was leaning towards overheat stat but getting no voltage to it, started...
  9. J

    Halstead ACE HE30 combi boiler dhw issue

    Halstead ACE HE30 combi boiler dhw issue, intermittent no hot water worse when heating been on. replaced hydroblock, diverter actuator, pcb and thermistor. None of these have made any difference also flow from hot tap same as from cold tap suggesting filters and heat exchanger okay. Any...
  10. B

    Ideal isar HE30 question

    Hi just a question that will help me in the future hopefully. I was working on said boiler today and the condense trap was completely blocked and had been for a long time to the point it was backed up into the bottom of the heat exchanger. I thought that modern condensing boilers would not...
  11. A

    Ideal isar HE30 boiler leaking from the diverter valve manifold

    Hi all i have the above boiler thats now in its 14th year of service .Now i know these things dont have a good reputation but i have to say this one has been relatively trouble free till now .Only last week i noticed a steady drip and after a little exploration i worked out its coming from the...
    • anthony
    • Thread
    • boiler diverter diverter valve he30 ideal isar leaking manifold oil valve
    • Replies: 2
    • Forum: Plumbing Jobs | The Job-board
  12. A

    ideal he30

    hi im hoping someone may be able to help my mum has a ideal he30 and it keeps coming up with l9 fault then if you let it cool and reset it sometimes it will work and other times it goes to 0 and 3 lines now ive found after following some advice that if i release the valve on the front of the...
  13. V

    Ideal HE30 L-F fault

    Hi, I have an Ideal HE30 which is displaying the L-F fault. I have measured only 110v dc at the gas valve(instead of 200v i believe) and there is no voltage going to the igniter module except for near the end of the sequence when 200v flashes up for about a second. The boiler goes through its...
  14. R

    Worcester green star he30

    Hi all Customer just called with a c1 fault on a Worcester greenstar he30 I'm not familiar with the boiler so google docs c1 fault appears to be low fan speed. Fixes seem to be split between new pcb or fan. I've not been to see the boiler yet but any info would be greatly received. Thanks Rich
  15. A

    Ideal HE30 Boiler Leak Diagnosis

    Hi all, Bought a property with a 'working' boiler. No issues other than a little weep which leads to pressure dropping over time. I'm reluctant to take the heat exchanger / pump etc out of it and was wondering if somebody with knowledge of this boiler an identify the leak from the pictures...
  16. M

    Halstead HE30

    Has anybody had any experience with a leak coming off the diverter motor at the bottom of the hydro block. Will replacing the diverter motor solve this or does the hydro block need to be changed. I don't want to fiddle with it in case it gets worse. I naturally would like to get the parts first...
  17. C

    Isar he30 carp

    Phone call this morning. Ideal isar he30 won't fire, it goes through a sequence makes two loud whooshing sounds that the custard said vibrates the case then it locks out to LF flame detection error. I changed the ignition probe and rectification probe 6 months ago so I can rule them out...
  18. G

    Ideal Isar HE30 failing to start CH

    Ideal Isar HE30 failing to start CH in the morning until you turn boiler off and on - it then works fine thru the day Last year it had a new diverter Vv head kit, pcb and heat exchanger after failing to kick in with hot water - anyone got any ideas what is up with it now
  19. A

    ideal isarrrgggghhhh he30

    Was called to one today, running the hot water tap made the heating come on and no hot water out of tap... so drained, disconnected all those stupid blocks and got to the diverter then replaced the cartridge (the old one was cracked in a few places) removed the plate HE and give that a flush...
  20. N

    Ideal Isar HE30 Leaking Diverter Valve

    Hi there, My boiler is a Ideal Isar HE30 and over the past month or so I've been noticing a leak from inside our boiler. The pressure drops to well below 1 which makes the central heating not work properly upstairs, if we top up the water pressure it leaks faster. I downloaded the boiler...
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock