Search the forum,

connections

HCL Connections is a Web 2.0 enterprise social software application developed originally by IBM and acquired by HCL Technologies in July 2019. Connections is an enterprise-collaboration platform which helps teams work more efficiently. Connections is part of HCL collaboration suite which also includes Notes / Domino, Sametime, Portal and Connections.

View More On Wikipedia.org
  1. R

    Undersink water heater connections - flexible hose SOV's

    Hi all! I'm in the process of fitting a replacement undersink water heater in my shed and, as advised in the instructions (yes, I know, what am I doing reading those!), it reccommends connecting to the inlet and outlet using SS braided flexible hoses. Nothing wrong there me thinks. I dropped...
  2. M

    radiator connections

    Hi.I have 6 caste iron rads and want to connect them all the lines are in with the stubs sticking out of the wall. There are two manifolds down stairs each with 6 pipes each so it looks like each rad has a flow and return. From the manifolds 2 pipes go back to a baxi gas boiler . What valves...
  3. O

    Bar shower connections

    Hi all, I have made a bit of a cock up. I have installed copper tails for my bar shower mixer at 150mm centres coming out the wall and finished the tiling etc to find the shower I have has the offset connectors which are meant to be threaded into a 90 deg wall plate. Is there another connector...
  4. C

    Shower head connections

    Have a Grohe shower head and struggling to find connections from this to my hot and cold supply pipes…. They fit 15mm threads but the thread is deep and the surface is not flat so am worried about the seal
  5. D

    URGENT Do I chase the connections into a wall.

    Hi all. I am in desperate need of a second opinion. I have two pipes (hot and cold water) that once ran down from the bathroom above and round a corner to our sink. Previously they were in a box in but the wall they were boxed into has been removed and now we are left unsure what to do now...
  6. B

    Shower feed and connections

    Hi all. Without going into long-winded explanations what I would like to know is- can I connect the hot supply from a standard vented cylinder together with the cold mains supply into a shower mixer. I know that I can only control the volume and not the pressure by fitting a valve in the line...
  7. J

    Soil pipe connections through wall underground

    Planning drainage for a new bathroom. Assuming that all the falls/gradients are correct is there anything wrong with this plan? Soil pipe from toilet goes through wall below the floor level so that I can connect a shower waste (wetroom so flush with floor). On the other side of the exterior wall...
  8. K

    Werback solar connections

    Hi . I am a DIY trying to reconnect my wetback and solar hot water panels I have had a horizontal outdoor water cylinder made up . Most of the connections are straightforward but I am not sure about the vent at the top . On the old one there was a 2 meter vertical open pipe but I am not sure...
  9. B

    Testing solvent weld connections

    Hello, I’m about to board and tile over a load of newly fitted waste pipes. I’ll be running water through the pipes to check connections (solvent weld) before going ahead but was wondering how much testing I should do? Would a leak show immediately or would I have to run water for hours to...
  10. Bogart

    Air separator pipe connections

    Yes I know it is me with yet another question. As some of you may know am redoing some airing cupboard pipework. Attached is a photo of the air separator setup. As you can see the feed,15mm, from the F/E tank is tee'd off the 28mm connection heading to the pump. I assume this is okay, well...
  11. R

    Corrosion on pipe connections.

    Chaps, I'm in Tenerife looking after a few houses. They are only 3-4 years old and this is the second solar tank to fail due to severe corrosion on the collector connection. Has anyone got any ideas why this should happen and both failed on this one connection after such a short time whereas...
  12. D

    Hot cylinder connections

    Hi All, Hoping someone can help me in working out how to stop the hot water from my hot water cylinder as there is no valve to do so from the top of the boiler. Also what are the valves 'A', 'B', 'C', 'D' & 'E'? The valve at the bottom of the boiler is seized, but I am hoping 'A' might be the...
  13. J

    Pushfit connections under low pressuee

    Non plumber here, just a householder so please go easy on me! Our house was renovated several years ago and all plumbing replaced. It is a mixture of copper and hep20 - listed building so hep20 was better in some places to use existing holes in joists. The system was fully pressure tested after...
  14. O

    Horizontal Soil Pipe connections

    I am refurbishing a bathroom and adjoining en-suite which back onto each other and are on the first floor of the house. Both have a toilet, washbasin and shower. The showers are electric and the flow rates are not excessive. There is a straight horizontal soil pipe (with appropriate slope 1:40)...
  15. Frelon

    Help with microbore connections!

    Hi all I am in the process of replacing the boring sink and pedestal in my cloakroom with a free standing cabinet (with drawers underneath) and a basin on top of the work surface. The house is 6 years old and all plumbing (apart from airing cupboard) appears to be 10mm microbore plastic. I...
  16. S

    Hive connections

    I am adding a hive hot water and heating thermostat to my baxi megaflow compact boiler which currently has no controls. My problem is I dont know what co actions to make inside the boiler from the wires 1-4 coming from the reciever. Any help would be great
  17. D

    Soil pipe connections

    I have a soil pipe coming out of the concrete floor under the window I am just wondering as it’s 220 mm off the wall can I use a 100 mm misaligned pan connector then a flexy pipe with boss to use a small projection toilet all information i am grateful for experts opinions Regards Gary
  18. V

    Soil Stacks and Connections

    Hi, I've been reading a lot about drainage connections and wondering if anyone can clear up a few things. I've sketched out the bathroom and utility plan below. Basic plan is: Foul stack coming from WC/Shower room overhead run internally in a large wall Connect ground floor into the stack -...
  19. M

    Rubber or fibre washer fill valve connections

    Any one started using rubber washers on copper tap connectors instead of fibre?
  20. A

    Hansgrohe ibox connections

    Hi I’ve got one of these but need some help identifying the right fittings. The ibox needs 3/4” male connections. My pipework is in 15mm. The only adapters I can find are compression but I’ve been advised not to use these in a stud wall. I’m a DIY‘er and my soldering isn’t great so it leaves...
Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock