Search the forum,

Anyone recognise this?

Discuss Anyone recognise this? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
finchy01

finchy01

Plumbers Arms member
Plumber
Gas Engineer
Messages
194
A mates siphon is letting by and he hasn't got a clue with plumbing so I told him to just replace the body. Does anyone know which this is though as I don't recognise it...

IMG-20180719-WA0002.jpg


IMG-20180719-WA0003.jpg


IMG-20180719-WA0001.jpg
 
Sure I have picked one up off the shelf at City Plumbing mate. Take the photo with you just incase
 
Ideal Standard/Armitage Shanks (same company). Graham merchants does a kit with a new washer and plastic plug to hold it in place.
Note that it is VERY important that there is at least a little free play beween the flush mechanism and the flush buttons on top of the cistern lid. Other than that, I think this is a good design of mechanism and worth keeping. As you say, you can also buy a new one and swap the bodies over.
 
Status
Not open for further replies.

Reply to Anyone recognise this? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

J
Leak detection company
Does anyone know a good, not super expensive, leak detection company in the London area?
Replies
0
Views
291
John-sjw
J
T
Trying to source a dual-flush valve
Does anyone know where I can get one of these? Toilet is leaking into the bowl. This one pushes in with a half turn but I can't find one anywhere.
Replies
2
Views
188
Thomas J Marshall
T
jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
276
oz-plumber
O
B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
212
oz-plumber
O
Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
129
Stigster
Stigster
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock