Search the forum,

Remove shower plate and cartridge

Discuss Remove shower plate and cartridge in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
J

JT5

Can anyone advise how to remove this plate and get to the cartridge? I need to replace it. Will likely get a plumber to do the work, but they all say they need to know the brand and model first, and there's nothing on the shower or plate that advises of this.

The ring on the thermostat part just keeps spinning, so it doesn't seem like it unscrews.

Many thanks in advance!

1511111430694.jpg


20171119_161915.jpg
 
Might be just suck on

Thin hacksaw blade all the way round
 
Sounds like another one for the showerdoc.co.uk
Or is it .com?
Definitely wouldn't suck on it
 
Good advice, but too late - didn't taste good. Will check out showerdoc - cheers!
 
  • Funny
Reactions: rpm
Another cheap Chinese mixer bites the dust!
Might be a good idea for any that are fitted, to stick a bit of paper in there before the trim goes on with some details of manufacturer, or where it was purchased.
 
Take off both handles. The lower ring will turn and the plate will come off.
 
Status
Not open for further replies.

Reply to Remove shower plate and cartridge in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
175
SimonG
SimonG
jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
276
oz-plumber
O
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
301
Chuck
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock