Search the forum,

Discuss Angled isolating valve advice in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
2
Hi,

I have a dripping current valve.

Its after a bit of a saga with plumber. They have told me I will have to get entire new magnaclean that it is connected to. I dont think that is right and surely I can just isolate this valve from other valves in line, and then replace with another angled valve?

If so do you have any recommended suppliers. I believe it is a 22mm valve. I found one supplier here:

Universal Angled 90 Degree Isolation Valve 22mm x 3 4 For ALL Boilers 3002160280

Any advice please?
IMG_9148.JPG
 
If you phone adey up they will send you new valves let me guess they had red heads they always leak new ones are black
 
Contact adey they will provide a replacment theres a good warranty on their products. Cheers kop
 
Status
Not open for further replies.

Reply to Angled isolating valve advice in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
2
Views
135
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
192
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock