Search the forum,

Discuss Help please Alkathene 21 to copper15 mm reducer leaking hissing in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
19
Hope pic worked this is leaking was just wondering if they need replacing after so long leaking at top over the white insert

Any help appreciated

IMG_2480.JPG
 
Looks like a bodge up white part shouldn't be visible, replace whole fitting using the correct adaptor to copper pipe.
 
:D needs replacing also needs a copper transition sleeve/piece in the top and not a normal 20mm insert
 
Ok I'll go and try and get a replacement tomorrow could this get worse like blow off while I'm in bed lol I'll turn water off from outside if that's the case

Many thanks for replys
 
Yes it could and agree turn the water off outside
 
Lol must have been when house was built 11 years ago I don't no what it's meant to look like just thought it shouldn't be leaking
 
On the black gunked up part to says 21-15 Universal
Can't see much else down hole don't think it's 25mm copper pipe looks flexi

IMG_2478.JPG
 
20mm alk then you have two options either buy a reducing / conversion set (like in the second link I posted) or buy a new 20-15mm alk fitting

Short bit of 15mm from the elbow to the new / conversion and an 15mm copper olive and your golden
 
Status
Not open for further replies.

Reply to Help please Alkathene 21 to copper15 mm reducer leaking hissing in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
218
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
214
  • Sticky
Morning to any Australians lurking around! Register its free, then message me, I'll sort your account out for you. We will need a moderator from each main country too. I'll post this in the Australian forum now.
Replies
0
Views
65
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock