Search the forum,

My new kitchen mono tap

Post new thread

Discuss My new kitchen mono tap in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Be kind

Be kind

Messages
29
Plumber had fitted a new mono kitchen tap. The hot water takes ages to get hot if at all. The on lever hadn’t much turn on it and it’s at full throttle. Also when I point tap to bowl with fairy liquid in, it doesn’t have enough power to make bubbles
 

Attachments

  • image.jpg
    image.jpg
    330.3 KB · Views: 19
Do you have a gravity cylinder eg copper ?
 
So should be equal pressures within reason

Isolation valve party close ?
 

Reply to My new kitchen mono tap in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

Be kind
Kitchen tap
I had a plumber fit a new mono block kitchen tap. The water runs very slowly now. Also, not sure if this is to do with it, but my hot water doesn’t get as hot as it did with my old tap. Anyone help?
Replies
7
Views
226
warmairnotwater
W
K
New mono mixer tap fitted, hot water flow is slow!
I have just replaced the old bathroom basin mono mixer taps, 2 tap heads, standard compression valve type, to a modern mono mixer single lever type. For some reason the hot water running on the new single lever mono mixer tap is slow flowing compared to the old ones. The cold water running...
Replies
30
Views
3K
Be kind
Be kind
O
My kitchen tap is leaking from the cold lever
Hi I have a leak on my kitchen tap it is coming out off the bottom of the cold lever. How do I get the lever off? Also would this tap have a cartridge in the cold & hot or will it be just tap has had it & I need to get a new one?
Replies
1
Views
484
oz-plumber
O
B
Dripping tap in my kitchen
I have a kitchen mixer tap with quarter turn levers and the cold side started dripping. I took out the ceramic valve and replaced it with one from Screwfix but it hasn’t solved the problem it still drips. Could it be a dodgy valve or is it something else? Thanks
Replies
5
Views
449
Belxvs
B
A
How to convert a 15mm tap tail to a 3/8" fitting
Hi, I am trying to fit a replacement tap to a mini-sink that's built in to the top of a toilet. The original tap isn't made any more by the manufacturers - the nearest equivalent is apparently this one: GoodHome Lazu 1 lever Mini Contemporary Basin Mono mixer Tap | DIY at B&Q -...
Replies
5
Views
797
Adam Mada
A
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock