BTSC Module 6

[mackieaj]

Hello all,

I am currently completing my plumbing course at BTSC Chessington. I am up to module 6 and have hit a stumbling block. I have one more chance to get my City&Guilds exam right!! I have been using the BTSC course book and the learn-a-trade CD to revise. Are there any other books or revsion guides I should be using? Any information would be a great help.

Many thanks in advance

Alex

[fuzzy]

you have one more chance, why? you can take the exams as many times as you need to. the 3 versions are for the first 3. if you fail them all you have to leave a 3 month gap from the first time you took it and you can take it again

what subject is module 6?

books-JTL revision is good

[mackieaj]

I have one more chance before I have to go back to the classroom for another week and go through the same work again before being able to book another exam. This is really annoying as I always listen in class and take notes on everything and revise thoroughly before the exams.

Module 6 is mainly about heating system pipe work, components, controls and boilers and flues with a small section on electrics. In the exam itself, there are lots of problem solving questions of which 3 of the answers are very likely. Without being on the tools myself I find this fairly difficult and there is lots of discrepancy over these answers between the trainers as they all do things their own way.

Oh well I have my exam this Wednesday, so hopefully I pass with flying colours.

[Fred]

Originally Posted by mackieaj

Hello all,

I am currently completing my plumbing course at BTSC Chessington. I am up to module 6 and have hit a stumbling block. I have one more chance to get my City&Guilds exam right!! I have been using the BTSC course book and the learn-a-trade CD to revise. Are there any other books or revsion guides I should be using? Any information would be a great help.

Many thanks in advance

Alex

I have some good books listed (and study instruction) on my blog.