 |
|
|||||||
| Plumbing Forum General plumbing questions answered in our plumbing forum. Please use this forum for plumbing related topics. |
 |
|
|
LinkBack | Thread Tools | Display Modes |
12-03-2008
|
#1 (permalink) |
|
Junior Member
Join Date: Mar 2008
Location: Lincolnshire
Posts: 3
 |
Need help to design Hot & Cold Water System
I am a self-builder and I am going to install the hot and cold water system (including radiators) but I need help from a qualified/experienced plumber to design it correctly - for a fee. When installed, I will call an approved boiler installer in order to comply and get the certificate of boiler installation and system commissioning. The communications will be by e-mail with drawings etc as it is not likely that the person who can help me will be local.
Any volunteers or does anybody know someone who can help? |
|
|
|
13-03-2008
|
#2 (permalink) |
|
Junior Member
Join Date: Dec 2007
Posts: 22
|
Re: Need help to design Hot & Cold Water System
No plumber worth his salt will "design" a water system for you. And your CORGI man will most likely insist on installing the whole c/h system. Im registered and there is no way I will sign off work unless I MYSELF have installed it because I would be the one liable if anything happened.
|
|
|
|
|
14-03-2008
|
#3 (permalink) |
|
Junior Member
Join Date: Mar 2008
Location: Lincolnshire
Posts: 3
|
Re: Need help to design Hot & Cold Water System
Same thing that some electricians told me but now the electrical system is installed and approved with the help of a registered electrician. I am a Designer and if I insisted on making everything I design I would be manufacturing computers, telephones, furniture and more. So don't speak for everybody.
|
|
|
|
|
14-03-2008
|
#4 (permalink) |
|
Junior Member
Join Date: Dec 2007
Posts: 22
|
Re: Need help to design Hot & Cold Water System
good luck to you then, i must have forgot designers know everything about everything. Surely if your good at what you do then you should earn a good wedge and be able to employ somebody to do all this for you, or maybe youve got too much time on your hands? Or too tight? I cannot beleive you installed all the electrics in your home and got the electrician to sign you off, tell me his name and I will report him for you
 |
|
|
|
|
16-03-2008
|
#5 (permalink) |
|
Junior Member
Join Date: Mar 2008
Location: Lincolnshire
Posts: 3
|
Re: Need help to design Hot & Cold Water System
Believe me, I woild not give the job to a small minded git like you. What are you doing in these forums, short of work? You are not going to find it with your attitude
|
|
|
|
|
|
|
| Bookmarks |
| Tags |
| None |
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Indirect hot water system pipe layout | bbasmdc | Plumbing Forum | 1 | 04-09-2008 09:02 AM |
| hot water keeps cutting out on combi system | obseen16 | Plumbing Forum | 2 | 21-08-2008 11:24 AM |
| Boosting gravity fed hot water feed to kitchen | J-Tuner | Plumbing Forum | 3 | 19-08-2008 05:27 PM |
| gravity HW & mains CW mixer tap problem | MarkB | Valves & Taps | 4 | 11-08-2008 06:17 PM |
| HELP! - WARM/HOT water coming from the COLD tap? | 34mark@gmail.co | Plumbing Forum | 3 | 19-07-2008 11:55 AM |
| Google Search | |
|
|
|
All times are GMT +1. The time now is 08:46 AM.
COMMUNITY SPONSORS
Training
Our sponsors keep the forum free to use, please click their banners (above) and use the sponsors when you can. Some offer special rates to forum members too.
Other Links
OTHER LINKS
Find a Plumber
Plumbers's Register Here FREE
Trusted Tradesmen
