Search the forum,

Recent content by Spreck

  1. S

    Ideal Logic & Logic + firing in the night?

    Apologies if this is a daft question! I've not worked on many Ideal's normally Worcestershire & Baxi's. Is it normal for the Ideal Logic & Logic + models to fire intermittently throughout the night even when no demand? Thanks in advance Spreck.
  2. S

    Running 21.5mm condense pipe into 110mm soil pipe question

    I stick in a hepvo to be on the safe side.
  3. S

    Green star 42CDi cavitation & EA Code

    Got called to a Greenstar 42CDi with EA code. checked flue -ok checked condensate - ok checked for gas etc - ok 17.54 Mbr (advised MI's requested min 18Mbr inlet mop) - low checked ionisation probe looked like a cocktail stick that worn 9.5yrs and not been checked before! Changed and EA sorted...
  4. S

    Gas meter bypass

    Saw something on watchdog the other week, they take this rather seriously this kebab shop needs dobbing in asap
  5. S

    Baxi DuoTec 33HE kettling

    Pump seems to be performing fine as tested the heating circuit and all heated up ok boiler in airing cupboard upstairs, checked rads and end of run downstairs heated well.
  6. S

    Baxi DuoTec 33HE kettling

    Had heating system stone cold and not passing so ruled out the div. I'll check the ntc again as you suggested. ta Spreck
  7. S

    Baxi DuoTec 33HE kettling

    Baxi Duotec 33HE E130 overheat activation / loud kettling Hi Guys, has anyone had issues with a baxi duotec with the error code E130 overheat activation the system was kettling like mad tested all the ntc's for ohm ressistances all good checked out the overheat stat again all good. Rang the...
  8. S

    Sime Super 60 / Potterton Profile 60e in disguise

    Nope not locking out just a bit slow on the uptake from what the owners have told me, oh forgot to say tested the integrity of the case seal with smoke stick all good.
  9. S

    Sime Super 60 / Potterton Profile 60e in disguise

    Hi Guys, I've had a call today to one of these and had been pre warned of an intermittent ignition fault didn't happen while I was there!! FGA came back good on PPM & Ratio, flue looked good no signs of degradation so ruled out visiation Gave the exchanger a good clean & the burner ports...
  10. S

    Bending 22mm pipe

    Yep hand held and my weetabix!
  11. S

    In need of engineer for ferroli f30 boiler Walsall area

    I'm afraid most of us love Ferroli not in a good way, I'd say you were best to get in touch with Ferroli direct and get one of the engineers direct not the cheapest but at least you'll be warm.
  12. S

    Worcester Greenstar 30Si Gas Valve changeover

    Ok update... if you have access to the left hand side of the boiler it would be a lot easier to get the valve fixing screws in and out. If not out with the old style condense trap ,short PZ1 required as condense mounting riveted! Bit tight on space to get the new valve connection onto the...
  13. S

    Worcester Greenstar 30Si Gas Valve changeover

    Hi Guys, has as anyone had to do a conversion from the old gas valve on a Worcester Greenstar 30Si to the new one they are supplying now? it looks like it might be an a*se? Seems it comes ready for 28kw and you need to faff to settle the Co/Co2 ratio change over some lovely plastic connections...
  14. S

    Water filter bypass

    Couldn't have drawn it better! only thing I'd change is i'd use full bore lever action a bit more robust and easier to use.
Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock