Also does anyone else print out all the Ofteec technical book updates ? and carry them in the van?
I told them i download them and keep them digitally, They said that is no good as you may not have access to the internet onsite
I thought we were supposed to be trying to waste less paper and be...
Hello
I need to have a complaints procedure to satisfy oftec
the inspector says theres one in the technical section on the oftec site? I can't find it anywhere maybe its called something other than "Complaints procedure"
Anyone know if there is one to print out and put my name on it (That...
https://www.fueltankshop.co.uk/1150-litre-fire-protected-bunded-oil-tank-tuffa-1350slbfp/p1696
Havent fitted one but Firestop tanks maybe someone else has ?
If its anegative as you say
He should just have to bleed the water through to the pump ( Fit some air vents )
And then usually the pump charges the little vessels and the start the switches once a shower is opened
So i would say tell him to install some air vents to fill the pump Cant be...
Hello
Never fitted a Heat Bank before but customer wants one, Personally i don't see the point as they are only have a gas boiler as heat source
Usually i would just install a decent unvented cylinder and a system boiler
the one they are looking at is Xcel DS 300 3 from Specflue
Does anyone...
Hi, Got a job to do installing a combi boiler, Gas supply pipe is in a cupboard in the kitchen which has been capped off just wondering if there is a reconnection fee and is it the customers job to arrange to get a meter installed
What is the usual process?
All the other jobs ive done have had...
I'd use copper, Makes me feel bad when I go to merchants and people buy a length of copper pipe for example and half a dozen plastic push fit elbows not that its relevant
Plastic fittings are expensive and I don't trust them, If you haven't used plastic before I guess you usually use copper ?
If it was me I would try above first, bung cylinder feed in cwsc drain hot water cylinder.
open highest tap or all hot taps and pull the bung on the cwsc and see if that clears any crap that could be restricting the cold feed to the cylinder
With a bit of luck its just a bit of crap that ll...
Is it all the hot taps just bath , loft and kitchen ?
If the cistern was drained to change taps could have let some rubbish down
If its all hot taps I would bung cold feed to hw cylinder and drain cylinder let cistern fill then let water go and hopefully will clear air lock / debris if that...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.