Search the forum,

Recent content by DjClubber

  1. DjClubber

    Broag Remeha Avanta 39C - Gc No: 47-673-04 - E5? ? ? ?

    Advice required here please from my fellow Gas Engineers. Been back n forth, well my Engineer has to a Broag Remeha Avanta 39c Combi Boiler. In Central Heating Mode not able to get the Boiler to stay Fired. Goes through the sequence, then after 5 trys it hits E5. When i turn the tap on, and...
  2. DjClubber

    Electric Boiler Installation: -

    Ok, so boiler just do the Heating, get a direct Cylinder. ..
  3. DjClubber

    Electric Boiler Installation: -

    Ok, there Electrics are being done by an Electrician. Its a renovation, complete rebuild refurb. . . All I am going to be doing is the Plumbing, Heating, Drainage, all the way through, all Electrics are the responsibility of the Electrician although will brief him with more info. . .
  4. DjClubber

    Electric Boiler Installation: -

    Ok, nothing suitable in Electric???
  5. DjClubber

    Electric Boiler Installation: -

    Going to be doing a job installing a Full Heating System using an Electric Boiler: - Is working out the kw to the property the same way as sizing a Gas or Oil Boiler? I am hoping to go down a Combi route in a 4 Bathroom House, 2 Main Bathrooms and 2 En Suites. Not actually seen the Job until...
  6. DjClubber

    Pressure Problems Abusive Engineer

    I wouldn't even make any point or raise my temper if I new I was working on Gas or any trade illegally. The front of it is beyond me . . . I wouldn't get any oik doing something they are not allowed to do. . .
  7. DjClubber

    Aqualisa From Pumped To Unpumped Processor

    No, not getting 1 in pic, that was just off FLEABAY just to answer my original question. Ill source a new unit. Normally would of spoke to Aqual for Tech but was closed when needed them LOL. . . Q answered here though. . .
  8. DjClubber

    Aqualisa From Pumped To Unpumped Processor

    Thanks, appreciated. Will order unpumped version. . . Thanks for the quick replies. Once again Appreciated. . .
  9. DjClubber

    Aqualisa From Pumped To Unpumped Processor

    Can you just convert the Processor from the Fully Pumped over to the Un Pumped Processor if the installation is just at the moment Pumped but being converted to a Combi? Ideally want to keep the Ceiling Fed Kit Below and just be able to change the Processor? Will it Wire in the same and be able...
  10. aqualisa.jpg

    aqualisa.jpg

  11. DjClubber

    Advice on work done by gas safe engineer

    I only meant it was a Speed Fit in the Pic, other guy mentioning Compression. I agree acceptable but not best practice according to MI etc. . .
  12. DjClubber

    Advice on work done by gas safe engineer

    Its not a compression its a speed fit 22mm coupling. . .
  13. DjClubber

    Advice on work done by gas safe engineer

    CORGI out of the Equation to be fair. . .
  14. DjClubber

    INTERGAS HRE 28/24 Combi

    If you are fitting a heat only boiler and don't have a separate sealed Expansion Kit then this is choice, if you have already got the sealed system in place, you wouldn't need it. A Heat Only Boiler generally doesn't come with an Expansion Vessel built in. Only System & Combi are more or less...
  15. DjClubber

    INTERGAS HRE 28/24 Combi

    Ok the Heat only is completely different to the COMBI. There was nothing wrong with the MAIN HEAT EXCHANGER on the Intergas. A Combi has the 2nd ary Circulation. Heat Only only has a MAIN HEAT EXCHANGE.
Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock