Search the forum,

Discuss Ideal isar HE30 question in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

BILLENK

Gas Engineer
Messages
15
Hi just a question that will help me in the future hopefully.

I was working on said boiler today and the condense trap was completely blocked and had been for a long time to the point it was backed up into the bottom of the heat exchanger.

I thought that modern condensing boilers would not work with a blocked condense? Is this not the case for all manufacturers?
(I mainly work on Worcesters and have only been GSR for 2 years)

I know there are different methods for boiler to sense blocked condense but still had me confused.

Cheers for any advice
 
You're saying the condensate (pipe, whatever) is blocked but it's still working as per MI's?
 
Hi just a question that will help me in the future hopefully.

I was working on said boiler today and the condense trap was completely blocked and had been for a long time to the point it was backed up into the bottom of the heat exchanger.

I thought that modern condensing boilers would not work with a blocked condense? Is this not the case for all manufacturers?
(I mainly work on Worcesters and have only been GSR for 2 years)

I know there are different methods for boiler to sense blocked condense but still had me confused.

Cheers for any advice
Are you Gas Safe Registered?
 
Yes I am, and yes the customer said it had been working fine except noisy which is the pump I have to change
 
Status
Not open for further replies.

Reply to Ideal isar HE30 question in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock