Search the forum,

Discuss F22 and filling loop only one handle.. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
24
Hi, stupid question but can anyone help...?
I had an F22 message on my ecotec pro 24. From what I've seen online I understood I had to use a screwdriver on the valve at the top of the filling loop (my filling loop only has one handle) but there isn't anywhere to use a screwdriver.... Just watched a couple of videos and they also suggest I should also have a gauge on my boiler which I don't. I've just tried turning the handle on the filling loop and the F 22 has gone any my boiler display reads 1,1. Does this sound like I might have fixed it...

Thanks for any advice!

IMG_20180310_194651.jpg


IMG_20180310_194618.jpg
 
Thats it
Yours has a digital gauge
1.1 bar and just above the lower dotted line on the right hand side of the display
 
yes thats it

with yours you just need to turn the black handle slightly open and wait for the error message to go
 
just on a bit of a side not when was the last time you had your combimate serviced (bottom middle/right first pic)?
 
The white box? I had my boiler serviced a year ago, not sure if they looked at that. Is there something wrong with it...?

yes they need to be serviced / you might laugh balls replaced :D
 
Status
Not open for further replies.

Reply to F22 and filling loop only one handle.. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock