Search the forum,

Discuss Worcester 37cdi combo E9 fault code in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
9
Hi,
I have a Worcester 37cdi combi & over the last couple of weeks it has been cutting out with the E9 fault code showing.
This evening I have reset it numerous times.
Any suggestions what is causing this ?
 
What's the pressure at ? Should be a dial on the front of the boiler
 
Is that with the heating warm or cold ?
 
I would say up the pressure upto 1.8-1.9 bar
 
I have upped the pressure but as soon as i turn the hot water on it cuts out with the E9 fault code.
When I press reset the green light is lit indicating the boiler is lit but there doesn’t appear to be anything coming out of the flue although the rads are getting hotter.
 
Sorry to say time to get a gas safe engy out
 
Status
Not open for further replies.

Reply to Worcester 37cdi combo E9 fault code in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock