Search the forum,

Copper cross 15mm for light project

Discuss Copper cross 15mm for light project in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
C

Chris hubbard

Messages
2
Can anybody tell me where I can buy 15mm copper equal crosses.having great problems finding them on uk web sites or retailers.

Thanks Chris
 
Hi,
On eBay under description below

15mm 22mm 35mm Copper End Feed Cross 4 Way Pipe Fitting for gas water oil

Hope this helps!
 
Plumb Loco said:
Hi,
On eBay under description below

15mm 22mm 35mm Copper End Feed Cross 4 Way Pipe Fitting for gas water oil

Hope this helps!
Click to expand...
Hi followed your lead and looks good have ordered 10 @2.72 each,donā€™t know if that is good but need them so had to order.thanks very much for your help Chris
 
Status
Not open for further replies.

Reply to Copper cross 15mm for light project in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

A
copper vs pushfit pipes
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
226
Chuck
C
W
Outdoor Tap at Porch
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
217
Dave Moore
D
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
229
exedon2
exedon2
T
22mm MDPE connection
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it šŸ˜¬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
252
ShaunCorbs
ShaunCorbs
dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
168
dreikher
dreikher
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock