Search the forum,

Discuss Vitra dual flush toilet constantly running in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
3
Bit of advice please. I'm trying to remove and clean the flush valve washer as I suspect it's either worn or needs a clean. (Toilet is not filling and emptying water straight out into the bowl). However, from reading a post on here it appears that I may have to give the unit a 90 degree turn to remove, but it's just not budging. Without wishing to break the unit, am I just being daft and missing something obvious? (Picture attached with the offending catch and there is a second one on the opposite side). Cheers.

20170910_125352.jpg
 
Turn it anti clockwise

It will be stiff but should come out
 
Status
Not open for further replies.

Reply to Vitra dual flush toilet constantly running in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock