Search the forum,

Discuss Closed Coupled gasket - seal . in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

quality

Plumbers Arms member
Plumber
Gas Engineer
Messages
4,294
Hi Toilet are not m thing as some may know however I have replaced a fill valve on cistern whilst carrying out other work at a property and the gasket between the flush mechanism and the pan is a little tired. It measure approx 70mm id but all the ones I can seal are for a 1 1/2 thread which is not big enough thanks in advance
 
Is it like a big o ring ?
 
That not the same one but I am pretty sure it will do the job thanks

Looks like a stnd donut with a hex in the flat end ?
 
You could do with a 2" foam doughnut! - what I always use, you can pick them up from your local City Plumbing
 
Big thick 2" foam doughnut with a nice bead of plumbers gold, will seal superbly, dont envy who goes in afterwards though!
 
Status
Not open for further replies.

Reply to Closed Coupled gasket - seal . in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock