Search the forum,

Discuss Where can I get a longer one of these please. It's from a tri flow tap with BW100 filtration system in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
3
Hi all,
This is the internal thread in my tri flow mixer, it is what the filtered water runs through and it also is what locks the tap to the sink. Unfortunately its too short and I don't know a) what it's called and b) how I can order a longer one so I can fit my new tap.

Help please

IMG_1635.JPG
 
Last edited:
Hi Mark,

If that's from a shower mixer you could contact showerdoctor directly and send them a couple of picture too. They surely can help you out as they are quite good at it.

I wouldn't know where to get this part directly so best try would be with showerdoc ... send them a pic of the shower mixer or tap and most likely they will sort you out. Perhaps thinking of changing the whole lot rather than servicing
 
looks like bsp thread try some brass threaded tube
 
Last edited:
It's from a sink mixer tap, three way. One for hot, cold and this skinny one for filtered water to drink. It has different threads too and bottom hence the hard challenge to replace
 
It's from a sink mixer tap, three way. One for hot, cold and this skinny one for filtered water to drink. It has different threads too and bottom hence the hard challenge to replace

how much would it need to belonger from the end of the threaded end (big thread)
 
Last edited:
It would need to be an extra 4 cm longer than it currently is as the work surface is much thicker than normal. Worst case is I'll have to chisel down some of the work surface to make it thinner so I can get the retainer screw on it
 
It would need to be an extra 4 cm longer than it currently is as the work surface is much thicker than normal. Worst case is I'll have to chisel down some of the work surface to make it thinner so I can get the retainer screw on it

any chance you could measure the external size of the big thread?
 
Status
Not open for further replies.

Reply to Where can I get a longer one of these please. It's from a tri flow tap with BW100 filtration system in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock