Search the forum,

Discuss new waste connection for toilet in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
8
Hi

I need to know which fitting to use for the soil pipe to make a new waste connection to the toilet. The new location will be 12inches to the left of the current one.

Thanks

toilet drain.jpg
 
thats a good one, as its glued fittings you would need to cut where the red lines (approx) and use two couplings and re pipe

toilet drain.jpg


toilet.png
 
Thanks for the fast reply. That's exactly what I needed.

I'll post a picture when it's done, though it might take a while.
 
Thanks for the fast reply. That's exactly what I needed.

I'll post a picture when it's done, though it might take a while.

may i ask why your removing / moving the existing toilet ? (bathroom update?)
 
why a 3m pipe and not just a 1m?

The previous owners changed the bathroom horrendously. All the pipes are visible and there's much less space now. What I'm doing now is just restoring it to how it should have been all along.
 
why a 3m pipe and not just a 1m?

The previous owners changed the bathroom horrendously. All the pipes are visible and there's much less space now. What I'm doing now is just restoring it to how it should have been all along.

if you can get a 1m piece go for that most places in the trade only sell 3m +
 
Status
Not open for further replies.

Reply to new waste connection for toilet in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

As part of a slow DIY bathroom refit I've removed the old toilet from the original location next to the soil pipe (and obviously capped off the branch) and plan to place it the opposite end of the room. I was pretty lucky to find a 110mm sewer waste pipe below the old sink which is the new...
Replies
4
Views
666
Hi all I really need some help or advise….. Back story….. Some years ago my dad had an extension to his house which included a newly built downstairs shower room. Recently he had this downstairs shower room re-fitted/decorated. Quite a simple set up consisting of a sink, toilet and shower...
Replies
2
Views
313
I have an old low gallonage toilet. It flushes fine when when liquid waste is present. Every time, when there solid waste in the bowl (not a lot) it clogs. I need to use a plunger each time to get the waste to flush. I made sure all the holes under the rim are clear.
Replies
1
Views
118
Hi guys, just want to get advice, i want to replace venten to unvented cylinder, is it ok to install D2 pipe to toilet waste pipe see picture? as there is no easy options to get it outside.
Replies
2
Views
173
Hello, I'm reworking our ensuite which is next door to the main bathroom. I want to connect the new toilet into the existing soil pipe which runs directly under it. See the picture below for the layout. Can I simply put a strap boss on to the existing soil pipe or is there anything I should...
Replies
2
Views
448
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock