Please help find these fittings

[PhilMitch]

Quick story, our fridge hasn't been connected up to water for awhile. Went to get the fittings but they was not all there. Now i'm unsure where to find the fittings in the pictures.

Obviously i have one side but i need the same fittings for the other side. So if any one could point me in the right direction where to buy or even mention what the technical name for these parts are that would help.

 

[Gasmk1]

Fridge Connection Kit - Vyair (UK) Ltd

 

[Chalked]

Looks complete to me.

 

[PhilMitch]

Fridge Connection Kit - Vyair (UK) Ltd

I don't want to use push fit. But thanks for the reply anyway.

Looks complete to me.

It's not that it's incomplete it's that i need to buy the parts pointed to with the red arrow again for the other side of the filter. The problem is i can't seem to find them.

 

[Gasmk1]

whats is the make of fridge as its probably their own kit nearly all fridges use the push fit type you may have to ring the manufacturers to get the bits

 

[PhilMitch]

It's a Samsung. The filter isn't the standard one so it won't be there own parts.
We bought the parts i just can't find or even remember where.

I suppose i could just buy this and then buy a 1" to 1/2" reducer. It just seems like a complete bodge job.

 

[ShaunCorbs]

What's the connection on the filter end ?

 

[PhilMitch]

It's 1" male.

 

[ShaunCorbs]

I would use the valve you have linked (may require a reducing bush but looks like bsp so that's easy enough)

And use the kit you already have for the other end

??

 

[PhilMitch]

If you could post links to the reducer that would help tremendously.
It would have to be 1" female to 1/2" female.

Or if i could find a 1" male to 1/2" female i could just put it directly into the filter head.

 

[ShaunCorbs]

Looks like a 3/4 to 1/2" bush you need screwfix link ok ?

 

[PhilMitch]

Any link will do, thanks.

 

[ShaunCorbs]

Bush ¾ x ½

Take your fitting that fits in there just to double check

 

[PhilMitch]

Thanks, though it's 1" not 3/4. The search continues...

 

[ShaunCorbs]

Thanks, though it's 1" not 3/4. The search continues...

3/4 is inch outside dia

 

[PhilMitch]

Yes sorry my mistake. Will let you know how i get on tomorrow with it.