Search the forum,

Discuss Baxi 105e combi temperature sensor in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
2
Hi. First time for me. I've joined tonight.
Can anyone tell me if the 2 temperature sensors on the above boiler are wet or dry.
Thanks.
 
Are you gas safe ?
 
Yes. (580059) Have been 18 years. Not too hot on boiler breakdowns. I installed this boiler for my son 10 years ago. This is the 1st problem he's had.
 
Right ok hope you understand, as we don't allow gas repair advice on an open forum for safety reason

Get your post count upto 10 (non spamming)

Then you need to pm a mod for further details (croppie, applumbing or gasman)
 
As above Colin. Get a few posts under your belt and pm one of us with your gas safe details.
 
Status
Not open for further replies.

Reply to Baxi 105e combi temperature sensor in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Locked
Hello, I have a ferroli falcon 2 boiler (yes it is pretty old). A few days ago the hot water started going hot and cold when running. Monitoring the boiler, the demand light works fine. When the water gets up to temperature every 10 seconds or so, the boiler stops for a fraction of a second...
Replies
3
Views
291
R
Hi, The outlet of all my radiators are at 55°C, but the boiler keep showing the Return Temperature is 60°C (and keep raising at 1°C/min rate) Also the flow temperature keeps going up above the set point and when it reaches +5°C above the set point, the boiler shuts down (even before the room...
Replies
0
Views
198
Renato
R
Hi everyone, I wanted to ask is there a function to remove air from a Baxi duo tec combi 24 HE A. If there is can some one kindly tell me the procedure. Looking online i found on newer baxi boilers that you turn the heating knob all the way back (12-oclock) anti-clockwise and then 2 quarter...
Replies
2
Views
513
    • Like
Hi everyone, Just wanted to share my experience with "upgrading" an S plan setup to Opentherm and Vaillant Control Center (VR66). There are a few threads on a few different forums but I wanted to share a full write-up with all the steps needed, benefits and costs. Overall, I fully recommend...
Replies
1
Views
1K
Hello everyone i have a Baxi 424 combi the system working fine but the maximum tempruter on the screen reach only 57 degrees for heater and 51 degrees for tap water this happened after a visit from (obviously) unqualified tecnichichan to fix a minor leak on the boiler, which initaly didn't efect...
Replies
8
Views
398
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock