J
Jacks
I'm a d I y plumber hope to learn a few things from this site
- Thread starter Jacks
- Start date
- Replies 5
- Views 914
- hello
Discuss jacks , hello just joined in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Status
M
Masood
Welcome Jacks. First lesson - don't mess with gas!
- Messages
- 34,327
- Solutions
- 2
Hello and welcome
- Status
Reply to jacks , hello just joined in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Hello all,
I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
My son has an apprenticeship interview for to become a plumber and heating engineer. The have said there will be a multiple choice exam for this for suitability. The thing is my son panics during tests/exams. Is there any book I can buy him to practice the multiple choice test for the exam? What...
Hi all I'm hoping someone can shine a light on this for me
Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall)
Unfortunately turning this to the closed position only reduces...
Hello all,
I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Creating content since 2001. Untold Media.
Newest Plumbing Threads
-
Mixer mixer shower, compatible with tanked supply
- Started by Matt0029
- Replies: 1
-
-
No Hot water, Fixed and Broken Again Ideal Logic 24
- Started by Filthbags
- Replies: 0
-
-
What's happening to this radiator, paint flaking off?
- Started by mikmikmikmik2024
- Replies: 2
-
Is it necessary to earth bond a Kitchen Sink?
- Started by Cello
- Replies: 3
-
Show us your fanciest radiators you have installed!!- Started by Lou
- Replies: 0
-
Y Plan, no hot water but heating is working when called
- Started by Chopper9495
- Replies: 8
-
-
Towel Rail Valve Advice please (35 Characters needed.)
- Started by NorthernLad
- Replies: 6
-
Unvented discharge at high level current regs
- Started by Matt0029
- Replies: 11
-
Trying to source a dual-flush valve
- Started by Thomas J Marshall
- Replies: 2
-
-
-
