Search the forum,

Discuss Hep 2o in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

gasmanrob

Plumbers Arms member
Plumber
Gas Engineer
Messages
3,238
100x 15mm 90
40x 15mm tee
350x smart sleeve inserts

open to sensible offers



image.jpg
 
Nah they are all overs. Been buried at the back of the shed. I'm boot fairing tomorrow and managed to make enough room to reach them
 
Just be careful that your employer doesnt jump to false conclusions.
 
I've had a pm from someone on the forum so for the second they have first refusal as they were in first.
 
I've had a pm from someone on the forum so for the second they have first refusal as they were in first.

Hi,

I'm only in Maidstone so if they decide not to have them I would be interested and could collect, just let me know what your after for them if they are still for sale.

Thank you
 
Status
Not open for further replies.

Reply to Hep 2o in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all how do you remove these smart sleeve inserts from an HEP 2.0 pipe thanks
Replies
5
Views
662
I had an outside tap fitted by a professional plumber last autumn. During the recent cold weather the feed pipe under the kitchen sink froze and the compression joint where the pipe enters an isolation valve now leaks. The outside tap was covered for the winter by an insulating blanket. I...
Replies
20
Views
913
Hello guys, first post here. While I prefer copper-and-solder, I've used compression fittings successfully in the past, and I opted for compression throughout the present job because I'm tight for space. I got most of the fittings from the local Toolstation. They're standard 15mm equal tees...
Replies
4
Views
436
C
Hi there, i’m in the process of remodelling a new build home and have a towel radiator i will be fitting soon to replace an ugly traditional radiator in the bathroom that was fitted by the builders. The fitted radiator has been removed, the pipes are “polyfit” brand 10mm plastic...
Replies
1
Views
1K
Are JG Speed fit fittings compatible with most 15mm plastic pipe? I want to swap out the tees and replace with JG Speedfit. Mainly because I'm not happy with the Flexi hose going into the back of the shower mixer valve. I want to remove the Flexi, fit a new one with an 90 elbow on the end, from...
Replies
3
Views
955
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock