- Messages
- 2,505
Inta magnetic filter.
first, sorry for the delay replying Ray, family bad news over past few weeks.
but,
have fitted the Inta on my own 26 year old system, so knew it would have to work hard,
valves seem good quality ( only time will tell) easy to fit due to correct sizing of required gap in the instructions,
easy to bleed and remove air,
dosing with chemical is also a dream,
one downside which may not be, is that the actual container has to emptied into another container before you can remove the magnet, others are like a cup whereas with the Inta you take the bottom off the cup first, not ideal in a tight situation I.e. under a confined space where you would have difficulty getting a container under the Inta.
its been fitted for 4 weeks now and the muck removed is as expected from a 26 year old system, in fact there has been so much removed, I'm not sure what's left of my heating system.
I will update in the next few weeks when I change my boiler over.
Steve
first, sorry for the delay replying Ray, family bad news over past few weeks.
but,
have fitted the Inta on my own 26 year old system, so knew it would have to work hard,
valves seem good quality ( only time will tell) easy to fit due to correct sizing of required gap in the instructions,
easy to bleed and remove air,
dosing with chemical is also a dream,
one downside which may not be, is that the actual container has to emptied into another container before you can remove the magnet, others are like a cup whereas with the Inta you take the bottom off the cup first, not ideal in a tight situation I.e. under a confined space where you would have difficulty getting a container under the Inta.
its been fitted for 4 weeks now and the muck removed is as expected from a 26 year old system, in fact there has been so much removed, I'm not sure what's left of my heating system.
I will update in the next few weeks when I change my boiler over.
Steve