We are installing solar power irrigation systems for smallholding farmers in Rural Ghana,
We have 12V DC 0.18kW (max 20A) pumps, there only power source will be a voltage varying from 15-20V coming from solar panels.
The boreholes are narrow, therefore is not much room for a float switch,
The...
Morning,
Does anybody know what happens to a solar thermal flat panels (a pair on south facing slate roof) that have been unused for at least 12 months possibly year before also. System has been switched of due to loss of pressure. How will last years heat wave conditions have effected the panel...
Moved into a new property around 4 years ago with full 15Kw Vaillant Arotherm ASHP setup, after quite a few initial teething problems seems to run well over last couple of years.
Long term just wondering if anyone can advise on servicing (in Berkshire area). Are there any independent specialist...
Can anyone recommend? .... training in heatpumps, books or web links on fault finding said heat pumps and a good place to get some experience- I'm looking to expand my knowledge.
I've done a taster course a few years back at colledge but that info has rusted in the back of my brain.
Hi, Solar thermal not so big these days but a couple of Q for anyone who still works in it.
Background. I'm an Electrician not a plumber.. I've been maintaining my otherwise excellent solar thermal (Original install MCS by Others), for the last ~ 18 years, over which time I've needed to clean...
If my mates in the Electrician's Forum see me in here, jus' tell I got lost, alright ;)
So, I was called out to the home of a good client. They have a thermal solar installation but were not completely clear of the difference - hence calling in a sparky and I was interested as to how thermal...
Hi all, my parents have had an air source heat pump installed a couple of years ago and have recently started undergoing refurbishing the house and have had several radiators removed and repositioned, can anyone help with regards to how to top up the system as I know that it has to have a glycol...
I'm building a new house and I have no idea what option to chose for heating/hot water! I've looked at biomass/pellet boilers, electric combi boilers, air source heat pumps and solar panels(combined with an electric boiler) After doing a lot of research (and not understanding some of the...
Hi . I am a DIY trying to reconnect my wetback and solar hot water panels I have had a horizontal outdoor water cylinder made up . Most of the connections are straightforward but I am not sure about the vent at the top . On the old one there was a 2 meter vertical open pipe but I am not sure...
Hello All, newbie here.
I am building a new home on a spacious plot and considering a ground source heat pump instead of air source.
I understand trenches need to be 1.2m deep, 1m wide, and 5m apart.
But how level does the overall site have to be?
My site is on the side of a hill and the...
Hello,
I hope somebody may be able to help. I have a ecodan heat pump system and have no hot water. The controls are set correct but the light for the boiler is blue. Anyone know what I’m going wrong please?
Thank you!!
Hello
My solar thermal system appears to be leaking fluid (pics attached). Could anyone give me an indication of what the issue is likely to be and the potential cost to rectify?
The system was installed in May 2021 and has a flat plate panel on the roof. It works very well generally and...
What are the factors that determine the life of a water tank? Obviously the quality of the water and the materials used to construct the tank are important. But beyond that I'm fuzzy. Is it just the number of gallons of water that pass through it? The number of "fresh" gallons of water that...
HI everyone,
looking for somewhere i can get spare parts for Nibe F370 1x230V Uk exhaust air heat pump, i need FL1 which is the safety valve assembly but never got parts for one before and not finding anything on google except
www.jsenergi.co.uk/nibe which seem to do all other models except...
Hi everyone, this is my first post. I've recently purchased a home where the prior owners have had some sub-standard work done in the past.
The pipework in the photos is the hot water feed from the solar panels down to the hot water tank. It looks like the copper pipe has been routed quite...
Hi
Can somebody tell me if a standard heat source pump installation uses a pressurized hot water tank? Or will the pressure for the hot water be the same as with my oil boiler and water storage tank (gravity-fed)?
We are installing solar power irrigation systems for smallholding farmers in Rural Ghana,
We have 12V DC 0.18kW (max 20A) pumps, there only power source will be a voltage varying from 15-20V coming from solar panels.
The boreholes are narrow, therefore is not much room for a float switch...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.