Questions and plumbing advice in the Plumbing Tools - We also have a popular tiling tools chat, and a electrical tools talk forums..
Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's
I am thinking of buying Rothenberger-Force-Pump to clear a blocked toilet ( when needed) but as its a bit on the pricey side I wondered if someone has any information on them before I buy
Thanks
I'm trying to find a spindle pin for this bender. This is the 19mm pin which goes through the quadrant bit then the bender frame, the bending arm, and out the other side. Irwin UK have told me this is only available as part of the quadrant assembly (Part No.T220H in their catalog, or part H in...
I bought these (not the ones in the image, what they sent) Ratchet Tool for 0.5mm²-10mm² Ferrules - https://www.tlc-direct.co.uk/Products/DVDCER510.html, however I had to return them as the crimps kept getting stuck, nearly broke the wire getting it out. I was considering these Ferrule Kit -...
I bought a torch a few years ago that uses EN417 butane/propane cylinders.
As someone who only uses a torch now and again, the torch has been fine on smaller copper pipe but struggles on 22mm, especially in the cold.
I have seen an adaptor by Monument (437a) which I think should allow me to...
Hi guys just wondering is there a drill pump or something that I can attach to pressure test when I'm on new builds. Currently using the rothenberger pressure test pump but that can take a while to get up to pressure pumping by hand. Thanks guys.
I recently moved into a flat with a Worcester Bosch CDi 35 Compact (or Classic System maybe?) and the thermostat on the boiler was broken (the thermostat was visibly damaged). I replaced it with a Drayton LP20RF receiver and thermostat. The boiler guy came round once other work was completed to...
How long do they normally last...changed the batterys but mine still churps away over an opened gas hob as if there's no leak (after calibration).
- Question
Where can you buy a box of 40 Danfoss nozzles and where can you get the best value for money, is there a need to be aware of counterfeit nozzles?
Hi everyone,
I am going to change the tap in my bathroom, is it quite straightforward to change a single lever tap, do I need any specific tools or should I get a plumber in to do the job, thanks.
Hi,
Can any plumbers recommend a good, reasonably priced inspection camera for use in waste pipes?
Thanks
Is there a decent third party offering out there as OEM are pretty expensive?
well thought I'd try one - thinking would enable me to remove nozz without touching the electrodes - its a Regin and pretty rubbish as the inner spanner fits the nozz snugly enough but the outer is too big for the nozz holder.....ah well ..what a waste
Ive looked at the tech specs and it seems that the REMS has a lower flow rate but higher pressure at 5.5 bar. the Kamco has a higher flow rate so i understand that will be best for flushing a dirty system, however its maximum pressure of flow is under 2 bar. I wish to use a mashine for...
Hi,
I recently opened the packaging of a new wood cutting semicircular cutter
for my Dewalt multicutter tool. As I was recycling the packaging, I came across this black piece of metal taped to the card in the packaging.
I have no idea what it is for and the impression I get is that I...
Seems like a good deal...£16.57 with discount code.
eBay item number: 154980230006...
I bought a Hozelock tap to hose fitting, though it doesn't fit the tap.
The diameter appears to be 22mm.
I desperately need a fitting for a hose to water some plants, as running back and forth with a watering can seems so unnecessary.
Can anyone point me to what I'm looking for...
Hi guys had to open a new account not sure what happened to my old one.. Is there a drill pump out there that can pump up my 1st fixes for pressure tests? As doing it by hand can take a long time. Thanks.
My house seems to be freezing and my double pvc glazing windows were installed over 20 years ago. The window seals have seen better days and there's gaps in between the window frames and window.
Not really done anything like this before as I am not a plumber or carpenter.
Does anyone which...
- Question
Hi, I'm in the process of buying the fittings for my new bathroom and I'm trying to find a combo toilet/ vanity unit. The one i'm looking for is the darky navy one the second image on the gallery on mabathrooms .co.uk . I spoke to the guy who owns ma bathrooms and he said that the customer...
Creating content since 2001. Untold Media.
Newest Plumbing Threads
-
Mixer mixer shower, compatible with tanked supply
- Started by Matt0029
- Replies: 1
-
-
No Hot water, Fixed and Broken Again Ideal Logic 24
- Started by Filthbags
- Replies: 0
-
-
What's happening to this radiator, paint flaking off?
- Started by mikmikmikmik2024
- Replies: 2
-
Is it necessary to earth bond a Kitchen Sink?
- Started by Cello
- Replies: 3
-
Show us your fanciest radiators you have installed!!- Started by Lou
- Replies: 0
-
Y Plan, no hot water but heating is working when called
- Started by Chopper9495
- Replies: 8
-
-
Towel Rail Valve Advice please (35 Characters needed.)
- Started by NorthernLad
- Replies: 6
-
Unvented discharge at high level current regs
- Started by Matt0029
- Replies: 11
-
Trying to source a dual-flush valve
- Started by Thomas J Marshall
- Replies: 2
-
-
-
