Questions and plumbing advice in the Plumbing Tools - We also have a popular tiling tools chat, and a electrical tools talk forums..
Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's
What's this kit like, I'm not up to speed with what's what in the 18v range but it seems like decent bang for buck. Is the gen 3 the "pro" HD range...
Hi everyone, I think this topic may have been covered before? I'm looking at getting a press gun, more specifically the Novopress, it's just my preference as I've used this and the REMS mini press. I have heard rumors that angled jaws may be on the way for the Novopress but nothing concrete...
My sister lives far away and needs work done and there are loads out there, which ones would you recommend if any?
Im a plumber mostly small bore houses etc. I have never used the Knipex Cobra Pliers Wrench. And dont know whether to buy a 7 inch or 10 inch. Hard to tell from picture on computer. Can anyone advise ?
Can I get Newteam Handle Chrome 911m SP-075-0015-C either new or used anywhere in the UK or any part of the world? If not is there an alternative?
Thanks.
Hi guys. I’m currently doing some site work and as I don’t leave my tools on site I’m looking for a good tool case/box on wheels if possible. Have any of you lot got anything you’d recommend? Cheers
Evening all,
I've not been on the forum for a while, what is/are your opinion(s) on EPH mv's please?
Regards
Jim
Hi,
Has anyone experience of the new Monument benders?
Any feedback?
Hi all.
Was looking at the Milwaukee transfer pump and wondering if it was fit for purpose ?
I’m doing new build and use a drill pump to pressure test and thought this piece of kit might make life a bit easier ?
Any thoughts please? Thank you.
-
- Question
Replacing 15 x stopcocks @ 22mm thought I'd try cutters as usually I pull 'em and space was tight.
These Ox brand 22mm cutters just deform the olive and score the pipe.
The jaws don't close properly as witnessed by the burr where the handles meet (pictured) preventing cutting of the olive.
Cost...
I'm thinking of getting a Stud Finder, so that when I drill or nail something into a wall at home, I don't puncture any pipes, wires etc.
I heard that cheap ones aren't good, not sure if this is true.
Any recommendations would be very welcome 😉
I am thinking of buying Rothenberger-Force-Pump to clear a blocked toilet ( when needed) but as its a bit on the pricey side I wondered if someone has any information on them before I buy
Thanks
Is there a decent third party offering out there as OEM are pretty expensive?
Hey all,
First post here, am an avid DIY'er and I'm putting in my mother-in-law's bathroom this weekend, this will be the 3rd bathroom that I've put in, however, I always get by with the poor tools that I have.
In your experience what would you say are essential tools?
I'm also looking to buy...
- Question
Hi, I'm about to install a UV water treatment and filter system with 3/4" brass connectors. So I need to buy MDPE pipe connectors, bends etc. I wondered what folk thought about Plasson, FloPlast, Other connector types, especially the plastic to copper connectors, which I believe strip easily...
- Question
Is there anyone out there recognise the manufacturer of the shower mixer valve , there is no markings on the leaver or brass work. It has started to leak around the barrel. Thanks
My house seems to be freezing and my double pvc glazing windows were installed over 20 years ago. The window seals have seen better days and there's gaps in between the window frames and window.
Not really done anything like this before as I am not a plumber or carpenter.
Does anyone which...
I need such a spanner to remove a failed IH, and to install a replacement; in a domestic hot water cylinder made by Opus (Cyprus).
I am aware that in general the distance across the flats may vary somewhat from brand to brand, despite all having 1.5" BSP threads.
In my case, both old and new IH...
Had to change a couple of monoblock taps a while ago and struggled to do the job untill I bought a set of cheap box spanners..
Although the spanners worked, I would prefer to use sockets where possible. I have now found some 80mm deep reach sockets on line and I am wondering if they would be...
My Parkside wet vac has sh_t itself .20v battery is sound but motor seized.Is anybody familar with the 18v Bosch 10 litre?
Creating content since 2001. Untold Media.
Newest Plumbing Threads
-
Trying to source a dual-flush valve
- Started by Thomas J Marshall
- Replies: 2
-
-
-
-
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
- Started by FozzieBear
- Replies: 3
-
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
- Started by boiler101
- Replies: 4
-
Hole in copper pipe, solder under floor, T coupling & protection- Started by dreikher
- Replies: 0
-
-
-
-
-
-
-
-