Questions and plumbing advice in the Plumbing Tools - We also have a popular tiling tools chat, and a electrical tools talk forums..
Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's
Evening All,
I've just had a mare of a day digging up a kitchen floor trying to re-route pipes. Can anyone recommend some kind of pipe detector that will detect pipes in concrete?
Jock
Is there a decent third party offering out there as OEM are pretty expensive?
Hi all.
Was looking at the Milwaukee transfer pump and wondering if it was fit for purpose ?
I’m doing new build and use a drill pump to pressure test and thought this piece of kit might make life a bit easier ?
Any thoughts please? Thank you.
-
- Question
Hi to all member
I want to post this product I bought some weeks ago in a website in GB, it is called Acqua Tempus
apparently it is very simple but it is not: it is a shower timer with shut off; it is programmable and has a lithium battery that gets charged with the passage of water, son I do...
24/7 EMERGENCY SERVICE AVAILABLE FOR
PLUMBING - HEATING - DRAIN CLEANING.
2429 Hartley Place
Wilmington DE 19808
Office: 302-308-1033
- Question
Hi Everyone,
I was wondering whether a professional plumber would use a tape to seal a leak temporarily so you have time to actually carry out the repair/ purchase parts?
How often do you use a tape for sealing a leak temporarily?
What type of tape would you use for this kind of job?
Duct...
My Superfire 2 is now leaking gas from the pressure relief hole ( just below the trigger).
It is 14 months old and looks like new. The previous one did exactly the same but i think I got about 3 years out of it.
I spoke to Rothenberger . They tell me they wont warranty their torches if you...
Hi,
Hope you can help with a central heating issue. I tried turning the central heating on today but without success. The orange light that usually comes on when the heating is triggered isn't illuminating - I've tried the once, twice and fully on modes and it doesn't come on in any of these...
I am thinking of buying Rothenberger-Force-Pump to clear a blocked toilet ( when needed) but as its a bit on the pricey side I wondered if someone has any information on them before I buy
Thanks
- Question
I am trying to undo the non return valves on my shower to clean them but they won't budge, I guess there is a tool for doing this but can't find one on line - help would be appreciated!
It's basically a very wide slot but my largest screwdriver does not do the trick, the maintenance instructions...
- Question
Where can you buy a box of 40 Danfoss nozzles and where can you get the best value for money, is there a need to be aware of counterfeit nozzles?
Alright my plumbers from another mother
Know it’s been asked before but what core drills are people using. I need to bite the bullet.
- Question
I am trying to undo the non return valves on my shower to clean them but they won't budge, I guess there is a tool for doing this but can't find one on line - help would be appreciated!
It's basically a very wide slot but my largest screwdriver does not do the trick, the maintenance...
I've a few bags all set up for different job types and all but my hot works tote all well past their use by date.
I tend to stick to Stanley because my merchant always has a good range but I'm never entirely happy with the way they keep heavy items like grips etc in place.
Now a friend...
Hello all our university is doing a project to build a rocket engine, we would need somewhere where we could learn how to choose the fittings, valves, fuel lines, and what attributes each have. we will be using two propellant to feed the engine the first one is liquid oxygen which is a cyrogenic...
- Question
Hi, I'm about to install a UV water treatment and filter system with 3/4" brass connectors. So I need to buy MDPE pipe connectors, bends etc. I wondered what folk thought about Plasson, FloPlast, Other connector types, especially the plastic to copper connectors, which I believe strip easily...
- Question
I've found this website called gasqet.com. They make 3D printed washers made out of a different plastic that is higher spec apparently, so it's a lot stronger, and recyclable (though why you'd want to, I have no idea). But they are the same price as normal washers.
Has anyone tried them out...
Looking to get one of these for a while and just got a job that's perfect for it to save me a fat drain down on a very old property, which one do you guys who use them rate, this place has 28mm return so ideally something suitable for that. Cheers.
My bathroom tap is dripping water, I want to change the tap valve, but I don't know the valve size, if somebody familiar with the type of tap, please tell me the valve size. Thank you in advanced.
-
- Question
Have become my go to screwdrivers. Cut off the flappy bits that get in the way and ordered a ph2 as it does not come with one. All good, recemmended.
Creating content since 2001. Untold Media.
Newest Plumbing Threads
-
-
-
-
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
- Started by FozzieBear
- Replies: 3
-
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
- Started by boiler101
- Replies: 4
-
Hole in copper pipe, solder under floor, T coupling & protection- Started by dreikher
- Replies: 0
-
-
-
-
-
-
-
-
-
Sewer pipe problems not sure about it- Started by sammie81116
- Replies: 3