We have 2 brand new cordless, battery powered press tools in stock, and flying off the shelves. Our TekTools TZ1930 & TZ1550 are packed with advanced features - these cordless press tools are engineered for speed, precision, and ease of use across various applications.
Just reply to this thread...
Never seen that type of ratchet wrench before...
https://www.youtube.com/shorts/G9BhDrQPKAU
Could be useful, Amazon sell singles of large sizes...
https://www.maxrpm.de/BGS-Line-Ratchet-Wrench-Set-6-pcs-BGS-8665?curr=GBP&opi=95576897
Dear all just bought this and tried to install yesterday.
Item is rubbish. Washer missing from bt which is needed to stop bolt turning. Other 3zwasher badly made and don't got bolt heads.
Spent ages making own new washer and hammering bits to fit washers.
In hindsight should have returned...
Hi guys just wondering is there a drill pump or something that I can attach to pressure test when I'm on new builds. Currently using the rothenberger pressure test pump but that can take a while to get up to pressure pumping by hand. Thanks guys.
Hi guys had to open a new account not sure what happened to my old one.. Is there a drill pump out there that can pump up my 1st fixes for pressure tests? As doing it by hand can take a long time. Thanks.
I bought a torch a few years ago that uses EN417 butane/propane cylinders.
As someone who only uses a torch now and again, the torch has been fine on smaller copper pipe but struggles on 22mm, especially in the cold.
I have seen an adaptor by Monument (437a) which I think should allow me to...
I've been trying to get hold of one of these for the last week or so for a customer. Almost every supplier that sells them don't have any at the moment. So far I've only come across two that did. One refunded after two days without any explanation. The other I placed an order with I've not had...
I'm looking for a shop/store to buy spare A/C parts in Lewisham. I'm looking for a compressor and electric board, if anyone knows of where to get them please let me know
well thought I'd try one - thinking would enable me to remove nozz without touching the electrodes - its a Regin and pretty rubbish as the inner spanner fits the nozz snugly enough but the outer is too big for the nozz holder.....ah well ..what a waste
Plumbing tools are essential for anyone doing their plumbing job. We also have tool talk on the Tilers Forum here and we have Electricians tool chat here!
Does anyone out there have a JTP shower or JTP taps installed? (previously known as Just Taps Plus).
Have you found a JTP shower and taps durable and reliable for years after installation? And straightforward to install?
JTP is being offered by a number of our local bathroom retailers and...
I work for a company that makes silicone dispensers and we're running a small focus group in Hungerford (UK) on 14th June to get feedback on some new products. If you have any tips on how to find local plumbers who can help, that would be great.
We're offering free lunch and a free cordless...
What's with the lack of sds max adapters for diamond cores.
I see countless sds plus bits as well as sds plus to keyed chuck adapter but I can't find any sds max bits.
Any one any ideas
Hi, I have a Hansgrohe T30 thermostatic cartridge (98282000) that I need to clean or replace, but I can't remove it. I've spent ages Googling this, but I just can't find the right tool to help - it's probably a custom Hansgrohe tool. Can anyone guide me? Thanks!
I don't live near a city and need to figure out how many rods of 56% I need to solder 3" copper to copper and come copper to stainless steel. I thank you for your time.
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.