Questions and plumbing advice in the Plumbing Tools - We also have a popular tiling tools chat, and a electrical tools talk forums..
Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's
-
- Sticky
We have 2 brand new cordless, battery powered press tools in stock, and flying off the shelves. Our TekTools TZ1930 & TZ1550 are packed with advanced features - these cordless press tools are engineered for speed, precision, and ease of use across various applications.
Just reply to this thread...
Alright my plumbers from another mother
Know it’s been asked before but what core drills are people using. I need to bite the bullet.
-
- Question
Hi to all member
I want to post this product I bought some weeks ago in a website in GB, it is called Acqua Tempus
apparently it is very simple but it is not: it is a shower timer with shut off; it is programmable and has a lithium battery that gets charged with the passage of water, son I do...
I've a few bags all set up for different job types and all but my hot works tote all well past their use by date.
I tend to stick to Stanley because my merchant always has a good range but I'm never entirely happy with the way they keep heavy items like grips etc in place.
Now a friend...
So it is time for me to scrap my vivaro which has just be written off my the insurance company after someone crashed into the van while parked. Lucky as I was just going to dump it this yr any way. Will be sad as have had it for 12yrs.
Any way, need to get a new one which complies with euro 6...
Now these have been out a little while can anyone give an honest review???
Just got myself a new 15/22mm pipe bender and am looking for a container. I have seen a couple of bespoke bags, but would rather a solid case of some form, if available.
Any ideas or pointers as to a suitable solid container?
Hi Guys,
I'm looking to purchase a 40mm PVC/Plastic pipe cutter, i have a ceapy chinese ratchet type one but the ratchet system is broke, plus a 40mm pipe barely fits into it.
I will be doing a lot of floplast or polypipe solvent 40mm cuts (not sure which atm, whoever is cheapest and does...
Hi all. I am looking at getting a press tool and was looking for advice please TIA.
so I am in need of a new tool bag or 2 as all the zips on my are knackered and it is weighing over 20kgs which is starting to hurt my shoulder lugging it around.
I know people like the veto's but the bags themselves weigh 4.5kgs. Ideally I need a lightweight but strong bag or bags?
I have...
-
- Locked
Merry Christmas boys and girls. :)
Thanks for all those who joined in the Christmas fun over the past few weeks.
Today's question is; What's the date you're going back to work?
Today's winner will get:-
An Amazon Food Hamper courtesy of Plumbase.co.uk (@Plumbase - Thank you!)
Please...
After not doing plumbing for alot of years my tools could probably do with an upgrade eg my bacho 10,12 inches open about as wide as a 6inch wide jaw now.
I see the armeg jaws for taps so probably going pick up them.
Also see knipex adjustable wrench that looked good.
Any tool ideas to make life...
Hi all. I hope you are keeping well.
I just had all my hand tools pinched from the side door of a house as I was packing up. Probably about £300 worth. Is it worth claiming on my insurance or as it is only £300 just pay for new tools. Would my premium go up that much is basically what I am...
Hi guys looking at upgrading the van and am looking at putting some sort of inverter set up in place. Now I know nothing about these other than I know pure sine is less likely to damage whatever is plugged in. Does anyone have experience of these at all?? Literally JUST looking at it recharging...
Hi all,
I'm a novice so go easy ;-)
I have a Rothenberger SuperFire 2 torch and would like some advice as to how to safely remove the tip from the gas canister as it is advised to store them separately when not in use? The advice slip says when storing, turn the control knob to the ON...
Never really bothered too much with my manual swager but quite like this quick and tidy result, available in new year apparently.
Nicked off Pb Plumber's instagram account, hate that guy....guns too big and van far too tidy, clearly plenty of time on his hands :)
Hi,
I after opinions on which M Class dust extractor is better for coreing holes when using a dust extraction adaptor. I have narrowed it down to either the Bosch GAS35 AFC or the Metabo ASR35.
Any one used them both?
- Question
Hi Everyone,
I was wondering whether a professional plumber would use a tape to seal a leak temporarily so you have time to actually carry out the repair/ purchase parts?
How often do you use a tape for sealing a leak temporarily?
What type of tape would you use for this kind of job?
Duct...
Looking to get one of these for a while and just got a job that's perfect for it to save me a fat drain down on a very old property, which one do you guys who use them rate, this place has 28mm return so ideally something suitable for that. Cheers.
I need to drill out a 32mm hole in a stainless steel bar (4 - 6mm) What is the best type drill bit for a normal combi 18v drill.
Creating content since 2001. Untold Media.
