Questions and plumbing advice in the Plumbing Jobs | The Job-board - .
Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's
- Threads
- 28
- Messages
- 32
- Views
- 19.5K
- Locked
What are your most awkward moments while on a job? 2 of us on boiler change yesterday, nice couple in their 50's, nice house etc. The wife tells me she's going out now followed by "my husbands leaving today!" Didn't really know what to say and thought I won't mention anything to my mate till...
- Locked
I am hoping somebody on here has some information on how to get some work from the free boiler schemes not sub contracting but getting registered to do it freom start to finish ie eco & greendeal also anything else or is it not worth it would be good if we could all put the info we have on one...
- Locked
http://www.ukplumbersforums.co.uk/plumbing-courses/8780-btsc-has-gone-into-administration.html#post50899
- Locked
Hi,
I have an older style open vented heating system with a Glow worm 50/60 RF flued fan boiler. I have a hot water tank on the first floor and two header tanks in the loft, one large for the hot water and a smaller one for the heating.
Last week I removed a radiator from the landing and...
-
- Locked
Mine was a Ford escort, colour Red, F reg
move out the way Lady Puller coming through.
- Locked
How much better if at all would a cheap inhibitor say around £8 compared to the more expensive mixtures around £15 to £20?
- Locked
Which is the best place to get good quality basic tools from e.g. Hammers, Pipe cutter etc?
I'm getting myself a tool box together :-)
Hannah x
-
- Locked
Inspired by the 'customers' thread.
People that say "PCB board" Arrrggggghhhhh!!!!!!!!!!
-
- Locked
I walked off with one (forgot to ask, handy for storing loose bits) for a customer-bought tap I just fitted. She phoned to ask if I had acidentally take it with me. I told her I did and that I'd drop it round monday. Was too busy and forgot and so dropped it round tuesday. She phoned to say that...
- Locked
Done a job last year and wonder what the rest of you money grabbers would charge for the following for your labour
job was an office block and it included on first fix (all pipes tails were in rooms just needed re-new)
female toilets
male toilets
kitchen area which included first fix pipe...
- Locked
Hi chaps, just wondering where to buy the above? For gas it is black malleable iron yes? I know bes sells some fittings but not pipe. So where do I buy the pipe from?
Cheers fellers
- Locked
the next set of greenies will be chosen from the following if you names on the list and your not interested just say and we will knock you off.
i know simong youve had it before but your name kept coming up again
the follwoing members have been put forward for a ta role if any of you are not...
- Locked
Hi, I live in a bungalow and have a 17 year old traditional CH system with 10 radiators, a BG Multihead III pump (replaced 5 years ago) and an Ideal Classic boiler (re-located in the loft 4 years ago). The system has been serviced every year by BG.
For as long as I can remember (and certainly...
- Locked
I was very silly and flushed things I shouldn't have down my toilet.
This was 5 days ago.
Since then the toilet has been working fine and no blocks in the loo or the toilet backing up.
I am just worried, because I dont know how clean or free and empty the toilet drain pipe outside taking all...
- Locked
The time has come to let her go. They do say if you love them set them free. It's a short wheelbase transit on an 03 plate. Not used for 18 months apart from the occasional run to keep the engine ticking over. No tax or mot. Blue/grey colour. Quality roof rack, t-bar fitted to the back. Tow...
- Locked
Hi all, thought it was always good to compare prices. Just quoted for a bungalow, including laying new loft insulation to 300mm depth. 10 rad system, all run in good old fashioned copper on drop downs to the radiator (surface run). Including the VAT I am coming in at £5,100. Seems expensive...
- Locked
All,
First time poster, long time reader!
I need some advice before I get some quotes to resolve an issue. I found out a couple of days ago (from a boiler engineer) that the gas inlet working pressure at my boiler is too low (approx 13.5mbar). I haven't got precise figures, but apparently the...
- Locked
have anyone installed the new worcester compact boilers, put my 1st one in today and i'd be interested to hear others peoples thoughts on them
I needed a as small as possible combi for a awkward install so my hand was forced, and considering the price I was expected to be impressed. In...
- Locked
Hi guys weekends here again..
Got a junior 28i about 12 year old boiler
The pressure is constantly topping up!
With or without the filling loop key .
The client has gone away until next week and not going to do any further work until they return and have left no number to contact whilst away...
- Locked
Just had this work done. I'm concerned about the longevity of the joints in this speedfit installation. Please comment on the pics.
https://8fnd1q.sn2.livefilestore.com/y1pxQWiX-2DW-dKhfePoAgdXdn1DkwZBsJ7Zc7I-NXBqoN75LcUtRDIWBAseG5pSEAH7s2-TQ-MD4FJrM_aOJpVghtTyigpmA4t/plumbing1.jpg?psid=1...
Creating content since 2001. Untold Media.
Tags
Newest Plumbing Threads
-
Mixer mixer shower, compatible with tanked supply
- Started by Matt0029
- Replies: 1
-
-
No Hot water, Fixed and Broken Again Ideal Logic 24
- Started by Filthbags
- Replies: 1
-
-
What's happening to this radiator, paint flaking off?
- Started by mikmikmikmik2024
- Replies: 2
-
Is it necessary to earth bond a Kitchen Sink?
- Started by Cello
- Replies: 3
-
Show us your fanciest radiators you have installed!!- Started by Lou
- Replies: 0
-
Y Plan, no hot water but heating is working when called
- Started by Chopper9495
- Replies: 8
-
-
Towel Rail Valve Advice please (35 Characters needed.)
- Started by NorthernLad
- Replies: 6
-
Unvented discharge at high level current regs
- Started by Matt0029
- Replies: 11
-
Trying to source a dual-flush valve
- Started by Thomas J Marshall
- Replies: 2
-
-
-
