Questions and plumbing advice in the Plumbing Jobs | The Job-board - .
Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's
- Threads
- 28
- Messages
- 32
- Views
- 19.5K
Hi all,
Small radiator upstairs is not working.
When the heating system powers up all the radiators get hot expect one. When I bleed the radiator, hot water flows through into the radiator and out of the bleed valve.
I have swapped the thermostat valve with another radiator but it hasn’t...
Hi all,
My customer would like a magnetic filter fitted. There's not a lot of pipe space - pics attached.
I've figured my two options would be an Adey Atom on the 22mm flow above the boiler (obviously not ideal, but I don't much fancy trying to access the 22return), or a very easy install on...
- Locked
Chester CH4 7DR
21 year old male
[email protected]
1 years experience 1st/2nd fix bathrooms and heating systems.
full uk driving license with car i have my own tools
NVQ Level 2 qualified.
currently in college doing my level 3 technical certificate (City&Guilds)
Looking for someone to...
- Locked
Hi, I'm struggling to find a job. Trained as a plumber, can drive (but currently no vehicle) and GS registered. There must be a vacancy out there for me! I am 50 years old, so I appreciate that might be too old for lot of employers. Thankyou!
Hello,
I am actually posting this question for my spouse. We are looking to move states. The state we are currently allows plumbers without a license to work in a plumbing company under someone with the required licensing. Currently, my spouse is considered an apprentice.
We are seeking to...
- Locked
I'm putting in a new rising main to my 1st floor flat. The pipe work is to run on the outside of the building in Insuduct. The water board will put in a new connection to the property boundary then a 750mm deep trench has to be dug to the Water Boards spec to the property (approx. 3m. long). I...
- Locked
Need help?
So just been told by my plumber that it looks like my unvented got water tank, Santon 300 litres is lime scaled up causing the pressure to be getting lower on the hot water.
Are there any plumbers or companies out there that can do a descale and flush through or otherwise I need...
I had two gas coal effect fires serviced. The plumber said that very few plumbers have the ticket for servicing these fires. A few weeks later another plumber came to service the Worcester Bosch combi. I told him what the first plumber said about servicing gas coal effect fires. He said that was...
I have just moved in to a 30s house in Norwich, and plan to install one of these:
http://plumbingsupplies24.co.uk/hygienic-buffer-storage-tank-vertical/
It will replace a vented system.
I am looking for someone G3 certified to commission the tank, and to provide annual inspection and boiler...
I am looking for a case for a worchester 240 combi boiler. The part is obsolete now but I would be happy to buy one if someone is renewing an old boiler and come across an old worchester 240.
- Locked
Several jobs (slight preference for gas safe as I will need my boiler serviced soon)
current jobs:
Replace ballcock in heating feeder tank
Replace (or remove) bypass valve on y plan
Estimate for fitting metal filter if possible to fit one in cupboard and fill with
Estimate for fitting remote...
Hi,
I'm in Warrington, Cheshire and looking for a plumber to quote to get a cold feed and waste piping installed for a dishwasher.
We're in a rented property and would need to run anything by the landlord first but not wrong with checking viability first right?
Current setup is the standard...
hi lads, I just wanted to find out from you what you all up to over the Christmas Periode and what’s the plans from your site.
To start of, I am leaving this country and going back to Germany, for couple of days and then to Poland enjoying the Christmas time with my parents in law. New Year’s...
- Locked
Hi, I’m looking for a heating engineer/plumber who has experience with both the wiring and pipe work side of a central heating system.
It’s for a large house with two main boilers and an annex served by a combi boiler. The house was extended in 2011 and two ‘new’ UFH manifolds serving the...
Hello, I am a new member and glad to be on board. I don't know anything about plumbing, but know how to a plunger. As a member I hope to some gain knowledge and advice.
My sink water drains into my washing machine. When I drain the washing machine it goes back into sink. This has been going...
Hi all. I have not done any drainage as of yet but will be next week.
I am taking out a macerator and instead installing a soil stack and underground drainage to an existing man hole.
Q1) can I use a short radius (rest) bend at the foot of a stack? When looking online it does say that this is...
Hi all,
Just a quick one to tax your tired brain cells.
Got a customer with one of these old beasts & i was called out to it late evening because of flashing 30 & 50 degree lights & no heating/hot water.
Had a quick look at it and nothing obvious bar an occasional drip from the diverter valve...
Hi I'm I've just joined and hope to gain some well needed knowledge! I'm replacing the old 1 pipe heating system in my house as its very old and full of leaks! We're putting down a solid wood floor so I don't want any joints under it that might fail!
I'm thinking of using the Emmeti manifold...
- Locked
I recently got an external condensed boiler installed that was about a year old. No more than a few weeks after, my system is losing pressure. It is now losing about 1 bat every 12 hours or so and seems to be getting worse. I've been all round the house including crawling through the attic, but...
We have a new Vaillant ecoTEC 624 boiler (installed in November), operating as a system boiler. It wasn't getting on well with our Honeywell thermostat, so we decided to get the vSmart thermostat and VR66 wiring control centre, which should work better with it.
One thing that seems to be...
Creating content since 2001. Untold Media.
Tags
Newest Plumbing Threads
-
Mixer mixer shower, compatible with tanked supply
- Started by Matt0029
- Replies: 1
-
-
No Hot water, Fixed and Broken Again Ideal Logic 24
- Started by Filthbags
- Replies: 0
-
-
What's happening to this radiator, paint flaking off?
- Started by mikmikmikmik2024
- Replies: 2
-
Is it necessary to earth bond a Kitchen Sink?
- Started by Cello
- Replies: 3
-
Show us your fanciest radiators you have installed!!- Started by Lou
- Replies: 0
-
Y Plan, no hot water but heating is working when called
- Started by Chopper9495
- Replies: 8
-
-
Towel Rail Valve Advice please (35 Characters needed.)
- Started by NorthernLad
- Replies: 6
-
Unvented discharge at high level current regs
- Started by Matt0029
- Replies: 11
-
Trying to source a dual-flush valve
- Started by Thomas J Marshall
- Replies: 2
-
-
-
