Questions and plumbing advice in the Gas Engineers Forum - This is a PUBLIC Gas Engineers Advice Forum..
Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's
Forum Prefix Filter
- Question
A customer rang this morning, says they have a intermittent fault on the boiler P3. Its a Worcester CDI30 I think from a past visit. I did quote for a new boiler 10 months ago, but the old one is still hanging in there. I looked on line as I don't have the book with me. Any suggestions? He says...
Hi All,
I'm looking into changing my conventional boiler (Worcester 30CDi conventional) to a Worcester Greenstar 8000 Style 30kW Combi.
My house has 2 bathrooms/4 beds - showers (Aqualisa) in both bathrooms, but never likely to be on at the same time.
Has anyone made the switch with these...
Hi all. I hope you are well. Need some advice on this boiler and fault. E229. Went there and condensate was totally blocked so cleaned it and still not fixed. Then serviced it and still got the fault. Called up worcester and one says its the gas valve as it is making a 3 whoosing noises while...
Hi All,
Wondering if someone can give me some advice.... Recently removed a healthy 30CDi Natural gas from a house and put it into my caravan... Obtained correct conversion kit from worcester which was just a chip.. I replaced the existing chip for new, adjusted air/ratio as instructed. Turned...
Hi chaps,
worcester 28i rsf combi, pump running,fan running but no ignition sequence, iv blew down aps and stil doesnt start up. Im thinking over heat stat is the issue. Does anyone have any guidance on this boiler? Any help appreicated, dont usually get involved in fault finding, installs man...
Hi guys.
Can this hose be removed without taking the vessel out? Is there a specific tool that makes it doable??
Cheers
Worcester 280 rsf. Heating works fine, hot water fires up but is only like warm. Now with heating demand I'm getting 240v at 3 port. With heating off and tap running it's only.luke warm. If I manually move motorized valve to left it gets upto temperature. Iam only getting about 4v on board with...
Hi all
I have a problem with a Worcester 24 CDI RSF.... The old worcester with the grey front..... the problem is low hot water pressure....I've had this before and have never managed to solve it.... checked the filter on the cold inlet and checked the plate heat exchanger too.... any ideas 💡
Hi, i was wondering if somebody could give me some advice.....
I was called out to a boiler breakdown the other day.
Worcester 15Ri. When i arrived onsite the blue light was flashing i put it into reset, fan started, boiler ignited . Boiler reached temp very quickly and shut down on overheat. I...
Hi all
Had my old baxi 105 replaced with a baxi 630. Got the ifos fitted and set to curve 40. So far all ok. My controls are a salus iT500. Now I realise this is not opentherm compatable, so is worth upgrading to an opentherm smart thermostat to work along side the weather compensation ??
I...
I went to look at a oil to gas Aga conversion yesterday late afternoon. I could smell the gas when I arrived. The gas cock is leaking. Too late in the evening, so just capped off temporally. The conversion looks like a Teddington conversion like this but with a different isolation valve.
This...
Hello team,
first of all, I apologise if this isn't the right section of the forum to ask, if so, please dear moderator, move the thread!
I am here to ask help as I just moved in a new house where I have a boiler that doesn't allow me to specify the temperature for water or for the heating but...
I have just been round to a customers as they have fault on their boiler. Turns out they have no gas. There is gas at the incoming valve but nothing going through meter. Who do they contact? Thanks
Hi All
I'm after a new sniffer for gas leaks... I purchased a Kane CD100A gas leak detector and at first it seemed like the best purchase I've ever made and made my life a load easier when I had those late call outs.... however it seems to be playing up and is maybe not as accurate as it...
Anyone recommend a flue gas analyser. My old Kane needs a replacement and they all seem to have gone up in price.
Someone suggested bluelyzer but I've never heard of them.
The company I work for has recently opened a training centre based in Southampton. We cover domestic gas ACS reaccreditation and have availability up until Dec 2022 currently.
The attached flyer has the price information for the reassessments, we also offer upskill to the elements we offer...
I have a Main Eco Compact Combi to move. As it's not out of the box, there's no paper template.
Is it possible to get it on its own?
I could ask Baxi but don't want to wait 30 min on the phone for a 'no'.
Alternatively I suppose you only need the vertical distance between the flue and the...
- Question
Hello
I’d like to replace gas cooker. Curry’s do install but I know they will refuse to install if regs are not met. So I want to understand whether the proposed location is acceptable to qualified gas safe fitter. I can’t find official, definitive list of regs anywhere. Can you point me to...
My anton evo2 now needs a £250 service with new oxygen and carbon monoxide sensors. My first thought was maybe I should just replace it.
Do the service bills get bigger than this?
Morning all,
Currently studying to be a gas engineer.
Could someone please advise me of the difference between a service and a safety inspection when it comes to appliances like fires, cookers and boilers?
thanks in advance
Creating content since 2001. Untold Media.
Tags
Newest Plumbing Threads
-
Trying to source a dual-flush valve
- Started by Thomas J Marshall
- Replies: 2
-
-
-
-
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
- Started by FozzieBear
- Replies: 3
-
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
- Started by boiler101
- Replies: 4
-
Hole in copper pipe, solder under floor, T coupling & protection- Started by dreikher
- Replies: 0
-
-
-
-
-
-
-
-