Re: Tool Kit
What lives in my tray:
Bahco 8073 adjustable as well as 9031 and it's little brother 9029.
8" Stilson
Stanley knife
Pipe slice 15mm and 22mm
Rad bleed key
Rad hex key
Screwdrivers
Drill bits
Footprints (big and small)
Fittings, nuts and olives
PTFE
O-rings and rubber and fibre washers of various sizes
15mm guide for benders
In the box :
Basin wrench
Junior hacksaw
Cold chisel
Lump hammer
Claw hammer
Allen keys
Folding rule
Tape measure
Tap box spanner for backnuts. Smaller ones for monobock taps etc
Pump pliers
14" stilson
Small level
2x pushfit ends 15mm
2x pushfit ends 22mm
Boa strap wrench (never use it but as soon as I take it out i'll need it, guaranteed!)
Lead-free solder
Fernox water hawk
Solvent cement
Flux
Wire cleaning brushes 15mm and 22mm
Large screw drivers
Immersion box spanner
22mm guide for benders
Pipe cutters
Bending springs (for two parrallel bends which need differing radii to look tidy)
I think that's it for my tool box. There's other stuff like long level, blowlamp, drills etc but that's all I think think of in terms of hand tools.
|