Plumbing Forum | Plumbers Forums | A forum for plumbers in the UK - View Single Post

Matty A · 02-10-2007

Cheers for that mate i sorted it today i up graded the pump to a twin impellor and boosted both hot and cold.
I put the pump infront of the cylinder in airing cupboard and it has its own seperate feeds both hot and cold this has worked fine. As for the noise it was just vibration which i sorted with some loft insulation taped to a piece a ply and placed under the pump.

I also changed the bath taps back to 22mm it has made a little difference but not much.

02-10-2007	#3 (permalink)
Matty A Junior Member Join Date: Aug 2007 Posts: 24	Re: pipe size question Cheers for that mate i sorted it today i up graded the pump to a twin impellor and boosted both hot and cold. I put the pump infront of the cylinder in airing cupboard and it has its own seperate feeds both hot and cold this has worked fine. As for the noise it was just vibration which i sorted with some loft insulation taped to a piece a ply and placed under the pump. I also changed the bath taps back to 22mm it has made a little difference but not much.
Matty A Junior Member Join Date: Aug 2007 Posts: 24	Last edited by Matty A; 02-10-2007 at 09:44 PM. Reason: Automerged Doublepost