Plumbing Forum | Plumbers Forums | A forum for plumbers in the UK - View Single Post

etaf · 24-04-2008

the plastic at the top has a hexagal shap on top with a metal nut inside is this nut part of the barrell attachemnet so i should end up with a plastic cup (upsidedown) on the top of the tap when i pull it off, will be the nut i can see and the screw thread as part of the barrell,

and then i will be left with a hexaganal hole in the top of the cup, when i pull it off

24-04-2008	#3 (permalink)
etaf Junior Member Join Date: Apr 2008 Posts: 2	Re: mixer tap washer replacement the plastic at the top has a hexagal shap on top with a metal nut inside is this nut part of the barrell attachemnet so i should end up with a plastic cup (upsidedown) on the top of the tap when i pull it off, will be the nut i can see and the screw thread as part of the barrell, and then i will be left with a hexaganal hole in the top of the cup, when i pull it off
etaf Junior Member Join Date: Apr 2008 Posts: 2	Last edited by etaf; 24-04-2008 at 03:14 PM.